Tamora lights problem

[philburch]

Hopefully someone can help dipped \ full beam not working main beam works when stick is pulled back to flash have changed relays and checked fusses all are good not very good with electrics anything else i can try before i take it to garage

[Rompy]

That’s almost certainly a RAS unit problem. This is an electrical switch unit sitting under the central gear stick trim panel. Low voltage instructions from your light switch are converted to 12v by this unit. Flashing the lights by the column lever uses a different wiring arrangement. The RAS units are no longer available but sometimes turn up at the usual breakers or can be rebuilt by the ex TVR electrical experts. If unsure, TVR specialist garages should be able to confirm and arrange repair. The RAS (relay and splice unit) is a key piece of the electrical system. It’s easy to remove and replace, once you are convinced that it’s the problem. You could check the connections on the unit - you may be lucky (I wasnt).

[philburch]

Thank you for replying will check the connections if no joy will give Python racing a call they repair electrical stuff

[Tamora s6]

Hi I had this problem on my Tamora it was the socket on the bulb
On back of head light burnet out worth a look it was h4 now changed
To led .

[philburch]

Will have a look over the weekend just in case that is were the problem is python racing agreed it sounded like the R S A unit it should be repairable