Tamora rubber thing thing behind the door, top of the pillar

[lasertam]

If you have a Tamora, you will know the thing I mean. Mine has come off a couple of times, and I keep trying to glue it back on, without much success. Any suggestions on the glue to use, any secrets to keep it connected? Other of course, than to stop knocking it when I get out of the car with the roof down!

[t40ora]

I've had it fixed by the dealership, and also used black silicon rubber sealant.

Usual process - clean it, dry it, hold/tape it in place and keep it warm. Still there so far.

[yanmar]

try araldite, it seems to held mine on , but as always just remember about them when you have the top down

[nailedon]

Had mine done by the dealer twice. Didn't stick, so sold the car.
Bought a T350c. Sorted.

Edited by nailedon on Sunday 3rd December 19:24

[valhalla]

Try using a product called 'Framefix', it just like superglue, comes in two parts...glue and activator in airarsole can. I use this stuff at work all the time, and many time on the TVR, and as long as the area to bond is clean, it will stick like s**t to a blanket, i know it will stick the rubber blocks, as i re-stuck mine on the T350c 2 years ago, and its still ok !
You can get other makes, and you can get it from B & koooo.
Good luck Dave