Stick-on plate recommendation

[doctor_darren]

Following G_Sleigh's recommendation to try a1-plates.co.uk, and having been never pleased with the stick-on plate from fancyplates.com, which was very thick and wouldn't easily conform to the curves of the T350, I duly order and fitted over the weekend. The worst part was taking the old plate off, a hour with nail polish remover getting all the glue off.

The a1plate stick-on is super thin, and even with my clumsy abilities I managed to get it on without a single crease and only a couple of small air bubbles.

Dr Darren

Edited by doctor_darren on Tuesday 28th August 12:27

[mrmop]

DR D, I have been looking for a good stick on plate for some time, ideally I wont one that is a custom size, one that is just large enough to cover the original screw holes and small enough to just get in the 5 digits on the plate.

Anyone have any ideas.

Cheers

MrMop

[doctor_darren]

Just checked their website and it seems a1-plates.co.uk only do standard size or square, but the self adhesive plate is thin enough to cut down to size with scissors and/or knife and at £11.00 might be worth a go.

Dr D