Removing rear Sagaris badges

[bignips]

Hi there,
Have replaced my front TVR badge..Anyone know how to get to the rear badge position for removal

[VARLEYHYD]

Try this:

To change the brake/indicator bulbs; remove the two screws on the trim rail for the roller blind, and the securing screws under the carpet on the trim rail base, peel the carpet back and the bulb holders are there. The reverse and fog light are accessed via the tyre inflator stowage compartment.

You will get to the badges between the two access points mentioned above









Hope this helps

G

Edited by VARLEYHYD on Saturday 1st September 08:47

[bignips]

Thanks for that G and including the pictures-great!
I'll let you know how it goes.
Pete.

[bignips]

Wel, i got the trim off quite easily and could feel the bolts at the back of the "TVR" badge, but how the hell could you get a spanner in there?!!!
Who's done it then??!
Pete.

[d.k.s]

best take speakers out too,it helps a lot if you got big hands like i have!

[bignips]

Hi Dan,
Does the speaker grill pop-off to un-screw the screws beneath?
I know the screw points aren't individual, but just into fibreglass, but i won't risk a "tearin-out" situation!!
Pete

[EwanM]

I want to replace my Sagaris badge and the two TVR badges. Where did you get your replacements?

[RedSpike66]

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

[Pharoah]

Just replaced my Sagaris TVR rear badge and can tell you that you definately need to take the rear speaker out to get to the nuts - it is easy then. The speaker grill just pops out (mine are Clarion speakers) and then 4 screws into the fibreglass to take it out.

[T5SOR]

Any pics fitted?