Sagaris Exhaust Rattle (now with pics!)
Discussion
Hi,
I thought before I took it to the local servicer I would see if any pictures might help someone diagnose my rattle
I`ve includes pictures of the left/right side of the exhaust and 2 pictures of the under-side of the car to show the exhaust leaving the central section into the rear.
Does it look like the exhaust is sitting too low?


You`ll probably notice the exhaust isn`t sitting correctly. Its sitting too far left and the left mount is twisted. Please Note : I undid the mounts, and repositioned them so they were correct but they slipped back within a few miles.

and..

Have looked at what people have said, I feel the exhaust isn`t supported in the center. Anyone agree?
James
I thought before I took it to the local servicer I would see if any pictures might help someone diagnose my rattle

I`ve includes pictures of the left/right side of the exhaust and 2 pictures of the under-side of the car to show the exhaust leaving the central section into the rear.
Does it look like the exhaust is sitting too low?
Left Exhaust View

Right Exhaust View

You`ll probably notice the exhaust isn`t sitting correctly. Its sitting too far left and the left mount is twisted. Please Note : I undid the mounts, and repositioned them so they were correct but they slipped back within a few miles.
Under car, showing exist of exhaust into rear

and..

Have looked at what people have said, I feel the exhaust isn`t supported in the center. Anyone agree?
James
Hi James,
Extra Photo added to new post
There should be a set of hangers under the diff area /stainless skid plate that holds the diffuser apron.
This photo looking front to back shows the cage with two mounts, the boss on the chassis is the skid plate bolt hole.


These rear box mounts should be solid and not be stretched too much

Hope this helps
G
Extra Photo added to new post
There should be a set of hangers under the diff area /stainless skid plate that holds the diffuser apron.
This photo looking front to back shows the cage with two mounts, the boss on the chassis is the skid plate bolt hole.


These rear box mounts should be solid and not be stretched too much

Hope this helps
G

Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff




