T350T passanger side indicators stay ON
T350T passanger side indicators stay ON
Author
Discussion

Matt T350T

Original Poster:

5 posts

221 months

Friday 4th April 2008
quotequote all
Hi guys my passanger side indicators stay ON (not blinking just always on) - sometimes when driving and sometimes when parked. I've had this a few times and there seems little logic to it as removing the relay doesn't turn them off (assume its space 32 flasher unit?). i have a new relay coming just in case.
Any ideas guys any known problems?

buckster

129 posts

222 months

Saturday 5th April 2008
quotequote all
Hi..

Could it be water getting in somewhere, causing a short?

Matt T350T

Original Poster:

5 posts

221 months

Saturday 5th April 2008
quotequote all
yeah chasing it out now - got to thinking it maybe the alarm and there is some evidence of moisture down there. have the alarm out now there is no evidence of water or corrison in the alarm box so now have the conatcts drying - will let you know what happens when the alarm is reattached.

Matt T350T

Original Poster:

5 posts

221 months

Saturday 5th April 2008
quotequote all
the alarm is reattached and works fine unless i have the alarm indicator / hazard fuse in then the passanger side indicator lights become consantly on again. at the moment the fuze is out and the car works fine except, but obviously i have no hazards / flash on alarm arming. Indicators work fine.
SOLUTION
Have traced the problem to an internal relay in the alarm box (FOR TEH INDICATORS) its the HFKM 012-shs part and is stuck on.
The alarm is going to be removed while i change this part and the hazards will work after replacing the fuse.

Edited by Matt T350T on Wednesday 9th April 15:44

Matt T350T

Original Poster:

5 posts

221 months

Saturday 5th April 2008
quotequote all
the alarm is reattached and works fine unless i have the alarm indicator / hazard fuse in then the passanger side indicator lights become consantly on again. at the moment the fuze is out and the car works fine except, but obviously i have no hazards / flash on alarm arming. Indicators work fine.
SOLUTION
Have traced the problem to an internal relay in the alarm box (FOR TEH INDICATORS) its the HFKM 012-shs part and is stuck on.
The alarm is going to be removed while i change this part and the hazards will work after replacing the fuse.

Edited by Matt T350T on Wednesday 9th April 15:45