Headlight Condensation
Headlight Condensation
Author
Discussion

rhyspw

Original Poster:

312 posts

221 months

Thursday 25th December 2008
quotequote all
Merry Christmas!!!

I am having a problem with the headlights of my T350, one of the lights has so much condensation in it that there is a pool of water forming at the bottom. I have searched this forum to see if there is a guide to fixing the problem but i haven't found anything.

I believe that drilling a hole somewhere is supposed to help?

Any thoughts would be appreciated.

Thanks

j3gme

949 posts

223 months

Thursday 25th December 2008
quotequote all
You need to remove your headlight covers very tricky! and have them resealed
do a search for resealing headlight covers Iam sure theirs plenty of topics

Merry Christmas j3gme

Edited by j3gme on Saturday 27th December 08:10

buckster

129 posts

222 months

Friday 26th December 2008
quotequote all
Hello...

I had the same problem and got a bodyshop to take lenses out and re-seal. One was sorted but the other steamed up again (tiny amount). I drilled a tiny hole on the underside of the light and that sorted it out...

Hope this helps.

Cheers

stub101

594 posts

245 months

Friday 26th December 2008
quotequote all
Ah that's interesting.... So where did you drill the hole? Any pics?

rhyspw

Original Poster:

312 posts

221 months

Friday 26th December 2008
quotequote all
how does drilling a hole help? Apart from "airing" the headlight? When you have drilled the hole does this not add to the problem? I have searched this forum for any info but it all seems a bit vague. I need fix it as it is getting worse everyday.....................

rhyspw

Original Poster:

312 posts

221 months

Saturday 27th December 2008
quotequote all
I have spoken to Automedon about this, they were very very helpful. I have been told that i need to remove the headlight and drill some holes at the very top of the light once the headlight is removed. However it seems very likely that i will break the headlight upon removal! So does anybody know where i can get a drivers side front headlight? Thanks

rolex

3,120 posts

287 months

Saturday 27th December 2008
quotequote all
rhyspw said:
I have spoken to Automedon about this, they were very very helpful. I have been told that i need to remove the headlight and drill some holes at the very top of the light once the headlight is removed. However it seems very likely that i will break the headlight upon removal! So does anybody know where i can get a drivers side front headlight? Thanks
Why not get Automedon to do the job for you, They did mine front and rear a couple of years ago and made a splendid job, no condensation since.

carsarecool

4,456 posts

268 months

Sunday 28th December 2008
quotequote all
^^^^^^^^^^ Wot he said ^^^^^^^^^^

Had mine done by Dulford 2 years ago, not a problem since.


rhyspw

Original Poster:

312 posts

221 months

Sunday 28th December 2008
quotequote all
Well after speaking to Automeadon there are no T350 headlights available - anywhere! So I am reluctant to have it done as they said there is a high chance of them breaking upon removal. I also like to do work on the car myself as it's half the fun of owning a TVR! So if anyone can point me in the right direction of headlights I would be very grateful.Cheers

konrad.holl

267 posts

234 months

Sunday 28th December 2008
quotequote all
I guess you're actually talking about the headlight covers/lenses. I got a spare set from Patricia Bickmore (PH tuscans0_0) about 1,5 years ago - was in the classifieds. You might want to try her.