Discussion
Road Hog said:
do you not like the sag rear wing ?
i think the rear flap on the sag looks ok - firstly it's clear so it's not as obvious, but also the sag has ridiculous scoops, lines and vents everywhere so seems to suit the car more. imo the T350 has classic unspoilt lines and shouldn't be altered.
The CF trims around the rear quarter lights looks great; finishes of the job nicely (and hides those screws that are sometimes needed to keep the windows from blowing out at speed).
I wonder what the car would look like with a simple thin Sagaris like rear spoiler, perhaps do that in CF. You could also do the spoiler hangers with CF.
I wonder what the car would look like with a simple thin Sagaris like rear spoiler, perhaps do that in CF. You could also do the spoiler hangers with CF.
Road Hog said:
abz said:
, especially that thing on the rear.The T350 looks stunning as it is, best leave it that way imo.
the idea was to create more rear stability (like the sagaris)
do you not like the sag rear wing ?
The carbon bits in that photo look so stuck-on its embarrassing. They make the glass (plastic) area look smaller and give the side profile a weird look IMHO. Each to their own though. Like I said - look in the Max Power ads - I was serious! You can buy sheets of this stuff to stick all over.
leave it alone.
lets not go down the barrified route, t350 is a t350 and is designed to be so.
The lines as stated in other posts should stay so.
but that is my opinion of course.
hideous
lets not go down the barrified route, t350 is a t350 and is designed to be so.
The lines as stated in other posts should stay so.
but that is my opinion of course.
hideous
Edited by bubblebobble on Friday 20th February 21:43
Edited by bubblebobble on Friday 20th February 21:44
I own an identical T350T in midas halcyon, it is an 05 reg. I am very keen to put sag spoiler on rear. I got one at two thirds height and tinted from Edward Quick along with my decats. It had reduced height brackets also. X Works service could not get it to line up right so I did not fit it. I still want a clear spoiler. In carbon it might look ok, yours might even look good in body colour IMHO. I do not think a sag spoiler takes away from a T350, yes it makes it look like a Sag a bit but whats wrong with that? I do prefer a spoiler with a bit of tint rather than clear. I wanted a T so I could get a some wind in my hair like my chim.
If we were all the same life would be dull, vive la diference!
Anyone know how to fit 4 point harnesses to a T350? I am planning on making a stainless strut between both seat belt points as fitted and put 4 studs to take top straps for pilot and co pilot, any ideas?
If we were all the same life would be dull, vive la diference!
Anyone know how to fit 4 point harnesses to a T350? I am planning on making a stainless strut between both seat belt points as fitted and put 4 studs to take top straps for pilot and co pilot, any ideas?
on my car the rear windows have both blown out, and my idea was to screwfix them securely to the car,then covering the screw heads with a very thin c/f cover ,also the area painted black on them is abit scruffy (paint and sealer)the c/f does look ok on the car, in the picture i had only placed the surrounds on to give effect.
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff








