Car won't let me in!
Car won't let me in!
Author
Discussion

earlyriser

Original Poster:

592 posts

236 months

Sunday 7th March 2010
quotequote all
Alarm and immobiliser LEDs are both flashing, so there is power in the car, but the doors won't unlock. It was fine 4 hours ago! Anybody had similar/got any solutions? Might it be as simple as the battery gone in the code-key?

TVRWazzock

1,653 posts

252 months

Monday 8th March 2010
quotequote all
On Saturday I started the Tam up, but it took a while for it to fire, once running the indicator's started flashing intermittently, and there were various fault codes coming up on the ECU.

I turned the ignition off immediately, and then put the Tam on trickle charge over night.

Next morning it started with no problems what so ever. Must be that the battery was low.

Maybe a good trickle charge over night might sort your problem out.

earlyriser

Original Poster:

592 posts

236 months

Monday 8th March 2010
quotequote all
Solved. It was the codekey. Having dismantled it I don't think you can change the battery, which perhaps means a new key. Good job I have a spare!

SP6 Animal

6,015 posts

239 months

Monday 8th March 2010
quotequote all
earlyriser said:
Solved. It was the codekey. Having dismantled it I don't think you can change the battery, which perhaps means a new key. Good job I have a spare!
Yes you can

earlyriser

Original Poster:

592 posts

236 months

Monday 8th March 2010
quotequote all
You're right! 2 x Panasonic CR 1220 3v, if anyone else is in the same predicament. £9 each, though. Someone In China is having a big :biggrin:

shep1001

4,620 posts

218 months

Monday 8th March 2010
quotequote all
earlyriser said:
You're right! 2 x Panasonic CR 1220 3v, if anyone else is in the same predicament. £9 each, though. Someone In China is having a big :biggrin:
£9yikes £1.00 for 10 of good old fleebay!

earlyriser

Original Poster:

592 posts

236 months

Tuesday 9th March 2010
quotequote all
Thanks for that. A certain ex dealer parts site down south is getting a return package

BURNIE

1,169 posts

269 months

Thursday 11th March 2010
quotequote all
My tam has had a new batt and now some weeks later the codes are comming up power supply does anybody know the prob?
Help alos trying to take rad out hope its not to hard stone through it bummer

shep1001

4,620 posts

218 months

Thursday 11th March 2010
quotequote all
BURNIE said:
My tam has had a new batt and now some weeks later the codes are comming up power supply does anybody know the prob?
Help alos trying to take rad out hope its not to hard stone through it bummer
Which code? is it 144 (Power supply control) when you turn off the ignition? I get this on mine sometimes. I ignore it nothing to worry about. The code is nothing to do with a new key fob battery.

Shep