how do i check my mileage- easy q for some1 to answer

[usmang]

Hi every1,

just want to check the mileage the car has covered but cant seem to find this despite going through all the options on the computer (clearly i have missed 1). So can any1 tell me how i check how many miles the car has covered please?

Ive check the manual but cant seem to find this info....strange....

thanks in advance

usy

P.S its a sag

[shep1001]

usmang said:

Hi every1,

just want to check the mileage the car has covered but cant seem to find this despite going through all the options on the computer (clearly i have missed 1). So can any1 tell me how i check how many miles the car has covered please?

Ive check the manual but cant seem to find this info....strange....

thanks in advance

usy

P.S its a sag

Use buttons on back of steering wheel. Milage is shown on the screen with both the speedo & tacho in view (centre screen at the bottom)

[usmang]

thanks shep but am i being retarded here? Ive flicked through all the options on the screen but nada. where do i go specifically?

[Targarama]

The mileage is shown at the bottom of the screen, same place as the trip distance. If you can't see it when cycling through the menus then perhaps your dash display has some rows of pixels missing? (just an idea)

[shep1001]

usmang said:

thanks shep but am i being retarded here? Ive flicked through all the options on the screen but nada. where do i go specifically?

On the LCD display with the screen view where you see the speedo and Tacho numbewrs, right in the middle at the bottom, between the graphic that indicates the fuel level & the engine temp is a line that displays the mileage. As Targ' says if there are lines on the display missing this may be why you can not see it.

If you go on you tube and search for 'TVR start up' there is a start up sequence for a T350 you can see it on there to compare if you are looking in the correct place.

Shep

Edited by shep1001 on Sunday 27th June 10:21

[Tamster.]

usmang said:

thanks shep but am i being retarded here? Ive flicked through all the options on the screen but nada. where do i go specifically?

It's possible the mileage reading's are resetting to zero when the ignition is turned off, are you seeing 00000.0 for total mileage or 000.0 for trip meter anywhere? alternatively drive a few mile's to see if the mileage is being recorded..