error codes

[chris plant]

Can anyone help.
Does anyone know what all the codes are on the T cars I keep getting error code 19 fuel sensor.
Its not a problem just an irratation press both switshes behind the steering wheel and it goes out.
The garage says its ok but I wounder.

[shep1001]

chris plant said:

Can anyone help.
Does anyone know what all the codes are on the T cars I keep getting error code 19 fuel sensor.
Its not a problem just an irratation press both switshes behind the steering wheel and it goes out.
The garage says its ok but I wounder.

I have a list of fault/warning codes, email me and I will send it to you. However, my code 19 is not fuel sensor.


Shep

[shep1001]

Hi All, a few people have asked for the list of codes I have. I copied them of PH a while ago so here we go: Shep

Warning Codes:

Oil_P_Under_Min =0x01 =1
Oil_P_Over_Max =0x02 =2
Oil_P_Lamp_On =0x03 =3
EFI_MIL_Lamp_On =0x04 =4
Water_T_Over_Max =0x05 =5
Oil_T_Over_Max =0x06 =6
Battery_Over_Max =0x07 =7
Alternator_Lamp_On =0x08 =8
Inertia_Lamp_On =0x09 =9
Battery_Under_Min =0x0a =10
Fuel_L_Under_Min =0x0b =11
Air_T_Under_Min =0x0c =12
Brake_Fluid_Lamp_On =0x0d =13
RH_Door_Lamp_On =0x0e =14
LH_Door_Lamp_On =0x0f =15
Light left on =0x10 =16
No seat belt =0x11 =17
Gear_T_Over_Max =0x12 =18
Diff_T_Over_Max =0x13 =19
Low_Fuel_Pressure =0x14 =20
High_Fuel_Pressure =0x15 =21


Fault Codes:

Water sensor =0x80 =128
Oil temp sensor =0x81 =129
Oil pressure sensor =0x82 =130
Fuel level sensor =0x83 =131
Air temp sensor =0x84 =132
Speedo zero =0x85 =133
Tacho zero =0x86 =134
Heater controls =0x87 =135
Heater flap zero =0x88 =136
Aircon Fault =0x89 =137
Gear_T_Sensor_Fault =0x8a =138
Diff_T_Sensor_Fault =0x8b =139
Fuel_P_Sensor_Fault =0x8c =140
Brake Fluid Sw.fault =0x8d =141

Power supply control =0x90 =144
Display FRAM failed =0x91 =145
Display FRAM corrupt =0x92 =146
Stepper FRAM failed =0x93 =147
Stepper FRAM corrupt =0x94 =148
Time clock failed =0x95 =149
Time clock corrupt =0x96 =150
Inter uP comms failed =0x97 =151
System initiation =0x98 =152
software invalid =0x99 =153
display switches fault =0x9a =154

[Rooty]

shep1001 said:

Hi All, a few people have asked for the list of codes I have. I copied them of PH a while ago so here we go: Shep

Warning Codes:

Oil_P_Under_Min =0x01 =1
Oil_P_Over_Max =0x02 =2
Oil_P_Lamp_On =0x03 =3
EFI_MIL_Lamp_On =0x04 =4
Water_T_Over_Max =0x05 =5
Oil_T_Over_Max =0x06 =6
Battery_Over_Max =0x07 =7
Alternator_Lamp_On =0x08 =8
Inertia_Lamp_On =0x09 =9
Battery_Under_Min =0x0a =10
Fuel_L_Under_Min =0x0b =11
Air_T_Under_Min =0x0c =12
Brake_Fluid_Lamp_On =0x0d =13
RH_Door_Lamp_On =0x0e =14
LH_Door_Lamp_On =0x0f =15
Light left on =0x10 =16
No seat belt =0x11 =17
Gear_T_Over_Max =0x12 =18
Diff_T_Over_Max =0x13 =19
Low_Fuel_Pressure =0x14 =20
High_Fuel_Pressure =0x15 =21


Fault Codes:

Water sensor =0x80 =128
Oil temp sensor =0x81 =129
Oil pressure sensor =0x82 =130
Fuel level sensor =0x83 =131
Air temp sensor =0x84 =132
Speedo zero =0x85 =133
Tacho zero =0x86 =134
Heater controls =0x87 =135
Heater flap zero =0x88 =136
Aircon Fault =0x89 =137
Gear_T_Sensor_Fault =0x8a =138
Diff_T_Sensor_Fault =0x8b =139
Fuel_P_Sensor_Fault =0x8c =140
Brake Fluid Sw.fault =0x8d =141

Power supply control =0x90 =144
Display FRAM failed =0x91 =145
Display FRAM corrupt =0x92 =146
Stepper FRAM failed =0x93 =147
Stepper FRAM corrupt =0x94 =148
Time clock failed =0x95 =149
Time clock corrupt =0x96 =150
Inter uP comms failed =0x97 =151
System initiation =0x98 =152
software invalid =0x99 =153
display switches fault =0x9a =154

Do you have any others? The T350c keeps showing me fault code 255, can you shed any light on it?

Cheers,

James