Front & Rear Offsets for SP12 Wheels

[s5tvr]

I have these already on mt T350 but I can't remember what the F/R offsets are - does anyone know ?

Thanks in advance

[Barry Ashcroft]

Takes the wheels of it will be stamped on the inside somewhere ET????

[willtvr]

s5tvr said:

I have these already on mt T350 but I can't remember what the F/R offsets are - does anyone know ?

Thanks in advance

Seem to remember that they were quite secretive about offsets so that they couldn't be bought direct. No doubt someone will be along to correct me if that was not the case.

[VARLEYHYD]

Offset for the front is 42mm and rear is 33mm

Its also on my Speeed six pages as they are the same as Sag

G

[willtvr]

VARLEYHYD said:

Offset for the front is 42mm and rear is 33mm

Its also on my Speeed six pages as they are the same as Sag

G

I hadn't realised the SP12s were exactly the same offsets as the Spiders

[fredd1e]

Seem to recall that the SP12s were different front ie set the offset to where it should be (see tuscan spacer fixed my handling thread) and this is ok on the T350 as the front rim is "only" 8" not the stock spider 8.5" .
I also think the rear offset was tweaked to allow the 9" sp12 to fit better but I could be wrong on this aspect but fairly certain on the front.

[Barry Ashcroft]

fredd1e said:

Seem to recall that the SP12s were different front ie set the offset to where it should be (see tuscan spacer fixed my handling thread) and this is ok on the T350 as the front rim is "only" 8" not the stock spider 8.5" .
I also think the rear offset was tweaked to allow the 9" sp12 to fit better but I could be wrong on this aspect but fairly certain on the front.