t350 brake discs

[ben_ek]

time to buy some new discs for my t350 (rear especially)!

does anyone know which car the discs come from i.e. which ap discs to order? or maybe the dimensions so they can be matched?

Edited by ben_ek on Thursday 3rd February 17:48

[Lensey]

Had two new 322mm fronts last year, £144.99 + VAT each Got them from Power.

[ben_ek]

each! that's quite a lot.

[Targarama]

TVR unique spec. How much do you think they charge for Porsche, BMW M, Ferrari discs?

[Lensey]

They are quite expensive but they are good quality and do a decent job for me and my late braking

[ben_ek]

late breaking rocks.

my porsche discs were less than that, but probably because they were readily available.

Edited by ben_ek on Friday 4th February 22:00

[cwin]

I have a set of a Sag in very good condition if they will fit ?

Craig

[ben_ek]

that could be awesome - just looked it up and unfortunately the rear discs on the sag are a bit bigger...

sag, tuscan s and red rose = 298mm diameter, 20mm thick
t350, tuscan, tamora, cerbera = 280mm diameter, 20mm thick

but the rear calipers are the same for t350 and sag, so would i be able to get the slightly bigger discs on the t350? or would a new mount be needed?

the front discs are also bigger by the same margin

ssag, tuscan s and red rose = 322mm diameter, 30mm thick
t350, tuscan, tamor, cerbera = 304mm diameter, 30mm thick

[cwin]

ben_ek said:

that could be awesome - just looked it up and unfortunately the rear discs on the sag are a bit bigger...

sag, tuscan s and red rose = 298mm diameter, 20mm thick
t350, tuscan, tamora, cerbera = 280mm diameter, 20mm thick

but the rear calipers are the same for t350 and sag, so would i be able to get the slightly bigger discs on the t350? or would a new mount be needed?

the front discs are also bigger by the same margin

ssag, tuscan s and red rose = 322mm diameter, 30mm thick
t350, tuscan, tamor, cerbera = 304mm diameter, 30mm thick

I have the calipers,handbrake cables, the whole lot, pm me if you are interested ?

Craig

[Targarama]

cwin said:

I have the calipers,handbrake cables, the whole lot, pm me if you are interested ?

Craig

I'm pretty sure you need to replace the whole rear hub assembly to get the larger rears installed. The larger front disks will fit with adapters, I have them on my car. Trouble is TVR used different setups so there is no one adapter which fits all. I bought adapters from TVR Power but Top Cats had to hack them around to make the callipers fit properly.