Aston Martin v8 vantage tyre pressure monitor system
Discussion
Just fitted new we heels to my vantage proper Aston wheels but without tpms,I have tried disconnecting the module under the glove box but it still comes up with system fault,have plugged it back in and the message reads check tyres and the orange light flashes and stays on constantly can anyone help,what if I take the valves out of the old wheels and just put them in the boot would this work?
Check out this thread at 6speedonline, which talks about the TPMS used by Aston. Unfortunately, without sensors the idiot light in the instrument cluster is going to stay on. AFAIK, there is no fuse dedicated only to the TPMS, so pulling a fuse is not a viable option.
http://www.6speedonline.com/forums/aston-martin/25...
http://www.6speedonline.com/forums/aston-martin/25...
A great many customers are requesting replacement sensors from us and I'm struggling to determine which are the correct replacement sensors for them. Huf sent a catalogue update this morning that shows:
DB9 07.12- Huf RDE011
DBS 09.07-2012 Huf RDE011
Rapide 02.13- Huf RDE011
Vanquish 10.12- Huf RDE011
Vantage 06.13- Huf RDE011
But nothing about earlier models that use the Smartire system. Has anyone replaced a Smartire sensor with something made by Beru/Huf and if so, what's the part number on their invoice?
Chris
Alloy Wheels Direct Ltd
DB9 07.12- Huf RDE011
DBS 09.07-2012 Huf RDE011
Rapide 02.13- Huf RDE011
Vanquish 10.12- Huf RDE011
Vantage 06.13- Huf RDE011
But nothing about earlier models that use the Smartire system. Has anyone replaced a Smartire sensor with something made by Beru/Huf and if so, what's the part number on their invoice?
Chris
Alloy Wheels Direct Ltd
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff



...