Cant get Fault code reader to work
Discussion
Hi
Hope someone can help had the car only a few days but in anticipation of some common faults bought a U480 fault code reader a while ago. It is the orange one which has had mention on here before. My car is 08 V8V. I plug in the reader and it says memoscan. I then turn on ignition and press enter. It scans through protocols and then says failed link.
Am i in the correct socket under dash slightly left of steering column?
Is this reader known as good to work with my car?
Unlike some images I have seen my car appears to have only a single grey socket on the same bracket as the footwell light.
Regards
Mark
Hope someone can help had the car only a few days but in anticipation of some common faults bought a U480 fault code reader a while ago. It is the orange one which has had mention on here before. My car is 08 V8V. I plug in the reader and it says memoscan. I then turn on ignition and press enter. It scans through protocols and then says failed link.
Am i in the correct socket under dash slightly left of steering column?
Is this reader known as good to work with my car?
Unlike some images I have seen my car appears to have only a single grey socket on the same bracket as the footwell light.
Regards
Mark
Edited by Gmw76 on Thursday 5th December 17:53
Can you confirm it is on the drivers side?
I am starting to believe that after a certain MY only one socket is there. I have seen internet images with 2 and some with one. The only thing on the single bracket is a light and a single socket. Similar to this link.
http://www.6speedonline.com/forums/attachment.php?...
Mark
I am starting to believe that after a certain MY only one socket is there. I have seen internet images with 2 and some with one. The only thing on the single bracket is a light and a single socket. Similar to this link.
http://www.6speedonline.com/forums/attachment.php?...
Mark
Gmw76 said:
Definately only one socket on my car. U480 works on a freelander but fails communication with Vantage. Others report success with this unit but they are earlier cars up to MY08 with twin sockets.
Was the system changed?
Can anyone suggest a known working reader for MY08 ?
Thanks
Mark
To be accurate, you do have two sockets. It's just that the other one is in the other foot well. You have nothing to lose by plugging your reader into the other port and see what happens. When plugging in to the body port, a 'can't communicate' message is typical.Was the system changed?
Can anyone suggest a known working reader for MY08 ?
Thanks
Mark
I have the same reader and understand what you mean, the timing of hitting scan button and switching ignition is crucial to avoid this problem, I can get it to work if I have it connected and then press the scan button and then very quickly turn the ignition on, any variation or delay gives me the error code.
Thanks for that Jalfonse.
Is you car the same age or newer than mine ?
Just tried again trying to be quick and various other combinations.
Starting to think I need an alternative code reader.
Anyone got a reliabe code reader suggestion for my model year?
Mark
Is you car the same age or newer than mine ?
Just tried again trying to be quick and various other combinations.
Starting to think I need an alternative code reader.
Anyone got a reliabe code reader suggestion for my model year?
Mark
Edited by Gmw76 on Friday 6th December 15:23
I purchased one identical to this and it has been used numerous times to reset the "Emission Service Required" faux pas (select the Jaguar diagnostic option since AM is not listed on the menu)
I have a 2008 MY V8VR with the single diagnostic port under the steering column
http://www.ebay.co.uk/itm/D900-Universal-OBD2-EOBD...
I have a 2008 MY V8VR with the single diagnostic port under the steering column
http://www.ebay.co.uk/itm/D900-Universal-OBD2-EOBD...
Jalfonse said:
I have the same reader and understand what you mean, the timing of hitting scan button and switching ignition is crucial to avoid this problem, I can get it to work if I have it connected and then press the scan button and then very quickly turn the ignition on, any variation or delay gives me the error code.
I wonder if you can elaborate on this a little as I too seem to be having the same issue with that same code reader not being able to link to the car...On the subject of OBD II fault code readers....is there a 'recommended' best buy?
Ideally the cheapest possible, I don't want anything over complicated or fancy, if my last 10 months of ownership is anything to go by...and I hope it is, I just want the facility to turn off the "Emissions Systems Service Required" message every 5 months.
Ideally the cheapest possible, I don't want anything over complicated or fancy, if my last 10 months of ownership is anything to go by...and I hope it is, I just want the facility to turn off the "Emissions Systems Service Required" message every 5 months.

I've got this one.
Works fine to clear those intermittent 'emission service warning' lights
https://www.ebay.co.uk/itm/Car-Fault-Engine-Diagno...
Works fine to clear those intermittent 'emission service warning' lights

https://www.ebay.co.uk/itm/Car-Fault-Engine-Diagno...
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff



