V8 Vantage 2009 Fuel Cap

[rovcallum]

OK, it seems I was a little rough with it while refuelling.
I had placed the fuel cap in the hole under the flap while I put the fuel in. It's a tight fit and the white plastic bit on the end of the fuel cap is slightly tapered.
Once I had finished refuelling, I grabbed the fuel cap and pulled it. The white innards of the cap (white end spigot and spring) then fell apart onto the forecourt.
I picked up all the bits plus a few other bits lying in the immediate vicinity and kind of reassembled it.
I'm now concerned I may not have all the bits and am trying to find an exploded diagram to check I've built it right.
Can anyone help?
Thanks in advance.

[rovcallum]

bump...

[Dewi 1]

You appear to have asked a question Callum, that nobody can answer.
That probably entitles you to a Brownie point.

I do not have a copy, but in the past there have been topics here about PDF workshop manuals.
I think they contain exploded parts diagrams, which is what you want to see.

Perhaps someone can send you a copy.

It was bad luck breaking the component. I noticed that my fuel cap does seem to be a very tight fit in the holder, although it does hold the cap whilst filling, but only just.

Edited by Dewi 1 on Thursday 15th June 16:22

[rovcallum]

I guess I must have reassembled it correctly as I've now done about 400 miles since the incident and all appears well. No smell of fuel, no leaks. No vacuum either!

I will eventually get round to spending £70 and a day of my life downloading all the technical manuals. Is there nowhere I can get a DVD?

cheers
rovcallum