Binnacle cover - bit of a stretch
Binnacle cover - bit of a stretch
Author
Discussion

ChilliWhizz

Original Poster:

12,443 posts

192 months

Wednesday 2nd August 2017
quotequote all
Currently doing the 'little' cosmetic jobs, which includes the shrunken leather on the binnacle cover.... I know this isn't an uncommon fault.. I've done a good bit of research (i.e. googling smile ) and I'm not sure it's possible to stretch the leather and glue/fix it without it looking obvious it's a DIY jobbie.. which is to say unacceptable... but I'm going to have a go.....










Nothing ventured and all that....

steveway

947 posts

115 months

Wednesday 2nd August 2017
quotequote all
where do you live, very good company at Sparkford in somerset called LW Piper, good and very reasonable price

ChilliWhizz

Original Poster:

12,443 posts

192 months

Wednesday 2nd August 2017
quotequote all
Hi Steve, thanks for that!! Just had a look at their website, clearly a professional company.... I'll give them a ring, see what their thoughts are on repairing... My thinking is if the leather can't be stretched to achieve its original look and the binnacle has to be recovered then I may well have it done in Chancellor (Red) to match the seats....



OK it wouldn't be original, but I think it would be quite tasteful scratchchin


Oh, I live in Norfolk, but posting it probably wouldn't be a problem... smile

steveway

947 posts

115 months

Wednesday 2nd August 2017
quotequote all
they are good, gave me a cost to provide purpose made seat covers for my V12V which was very competitive but decided to go with bolster repair when and if needed. Just doing a roof on my wifes boxster as well

AdamV12V

5,314 posts

208 months

Wednesday 2nd August 2017
quotequote all
Would be a very nice idea to the binnacle in chancellor red, but bear in mind if you want to keep it looking original you should do the "Upper IP" at the same time as they are always the same colour as each other (unless you go down the Q route).

like this...




ChilliWhizz

Original Poster:

12,443 posts

192 months

Wednesday 2nd August 2017
quotequote all
AdamV12V said:
Would be a very nice idea to the binnacle in chancellor red, but bear in mind if you want to keep it looking original you should do the "Upper IP" at the same time as they are always the same colour as each other (unless you go down the Q route).

like this...

Bloody hell that looks nice smile

Er, why is it called 'Upper IP' Adam?

AdamV12V

5,314 posts

208 months

Wednesday 2nd August 2017
quotequote all
ChilliWhizz said:
Bloody hell that looks nice smile

Er, why is it called 'Upper IP' Adam?
Have a play with the AM configurator, but using it is a bit of a fine art. You have two colours to choose from, First and Second, each with different pallets available. It makes a difference to the next step of zone colour choices which is which, so Black First and Red Second would present a different set of options to Red First with Black Second!

Once the First and Second colours are selected you then pick the various zone colours and a choice of each in Leather or Alcantara, subject to availability. The zones are Upper and Lower environment areas, Upper IP (this seems to be limited to the choice of Second colour only), Seat inner and outer areas and the door and seat accents. All in all quite a lot of flexibility, but the two areas of the Upper IP are always the same - that's the binnacle and the thin strip that runs under the front windscreen.

Upper IP stands for Upper Instrument Panel I believe.

I quickly knocked that up to show what your car's current combo - together with Upper IP in Chancellor Red too.

You perhaps tell how long I spent on the configuration process with Kermit... wink

ChilliWhizz

Original Poster:

12,443 posts

192 months

Wednesday 2nd August 2017
quotequote all
Wow! Thanks Adam smile

Don't spose you have any pictures of Kermit's interior biggrin

AdamV12V

5,314 posts

208 months

Wednesday 2nd August 2017
quotequote all
ChilliWhizz said:
Wow! Thanks Adam smile

Don't spose you have any pictures of Kermit's interior biggrin
Well, I had loads on my spec thread but because I used one of those photobucket accounts all the links no longer work! They have recently changed their policy to block links from forum posts unless I pay them $60 p/a for a subscription! Grrrr

So here is a "thumbsnap" repost of the original interior pics I took just before delivery smile

Spec is full Pure Black Leather and Pure Black Alcantara combo with:
  • Lightweight bucket seats
  • Piano Black waterfall and door pulls
  • Pure Black Alcantara steering wheel and headliner
  • Custom Q Lime stitching everywhere
  • Custom Q gear gaiter in Pure Black Alcantara, with Pure Black knob and Lime stitch
  • Custom Q Pure Black Alcantara dash, with Upper IP in Pure Black Leather with Lime stitch - (Note: although colour can be changed it is still almost always the same fabric).
  • Custom GT8/12 "Contemporary" dials / instrument pack
Dark and sinister on the inside to contrast the rather lairy outside! biggrin








ChilliWhizz

Original Poster:

12,443 posts

192 months

Wednesday 2nd August 2017
quotequote all
Stunning..... Love the Alcantara, in many ways so much more attractive and tactile than an all leather interior.... great choice...

ChilliWhizz

Original Poster:

12,443 posts

192 months

Monday 7th August 2017
quotequote all
So,

Long process, but patience is a virtue... (allegedly)


LordBretSinclair

4,306 posts

208 months

Monday 7th August 2017
quotequote all
Have you thought of applying some gentle heat (low hair dryer) whilst stretching the leather???

ChilliWhizz

Original Poster:

12,443 posts

192 months

Monday 7th August 2017
quotequote all
LordBretSinclair said:
Have you thought of applying some gentle heat (low hair dryer) whilst stretching the leather???
Yes my Lord, but I've stretched it over quite a distance... maybe 8" around the front sharp curve, and I've let the weight hang for maybe 6-8 hours at each 'stretch point'... over what must now be around 5 days... I've also been using beeswax with almond oil to soften the leather to avoid the possibility of cracking or tearing it whilst hanging the weight off....

I'm getting near now, and I'm going to use a contact adhesive, rolling from the upper area in the hope it'll allow the leather to cover the area it's receded from.....

Should definitely look hugely better than it was, but if it's not up to scratch then I'll have it recovered by a professional... I'm committed to making this 07MY Vantage totally mint... It's an OCD thing..... biggrin

Flugplatz

1,955 posts

276 months

Monday 7th August 2017
quotequote all

Maybe this would suit?

https://www.astonmartinbits.com/models/5-V8-Vantag...

Edited by Flugplatz on Monday 7th August 20:18

ChilliWhizz

Original Poster:

12,443 posts

192 months

Tuesday 8th August 2017
quotequote all
Flugplatz said:
Maybe this would suit?

https://www.astonmartinbits.com/models/5-V8-Vantag...

Edited by Flugplatz on Monday 7th August 20:18
You sir are a gentlemen... trying to buy it along with a new set of wheel centres, but the astonmartinbits website is playing up....

Managed to stretch the leather a bit but stretching it after its been shrunk has mullered the texture of the leather so it'll never look nice (or original)

Thanks again Flugplatz smile

ChilliWhizz

Original Poster:

12,443 posts

192 months

Wednesday 9th August 2017
quotequote all
So, turns out the cover on astonbits was an old ad so no longer available frown They do have a couple available but wrong colour, so will have to order new one which is £165 plus VAT and 6-8 weeks delivery....

In the meantime, the old one will have to go back on.....

Before and after (after I mullered it)



Hopefully it won't look so bad viewed through the windscreen after refitting frown

On a brighter note, this lot arrived yesterday afternoon, with obsidian black Scuff Master dye, they don't however have chancellor red off the shelf and have asked me to send them a sample so they can colour match.... Not sure I should be let loose inside the car armed with a sharp knife or pair of scissors though scratchchin


dbs2000

2,756 posts

223 months

Wednesday 9th August 2017
quotequote all
Not to worry, it's always better to try something before throwing cash at it smile

Graze01

1,203 posts

123 months

Wednesday 9th August 2017
quotequote all
Chilli

I tried a similar effort with mine and improved it a bit but realised it wasnt going to be good enough

So I took it to the local auto trimmer that I know and for $100 (about 60 quid) he recovered it in nappa vinyl (I cant tell the difference to the leather) and it will never shrink again

Graze

cayman-black

13,268 posts

247 months

Wednesday 9th August 2017
quotequote all
Graze01 said:
Chilli

I tried a similar effort with mine and improved it a bit but realised it wasnt going to be good enough

So I took it to the local auto trimmer that I know and for $100 (about 60 quid) he recovered it in nappa vinyl (I cant tell the difference to the leather) and it will never shrink again

Graze
Good idea , try to get it covered professionally first if cheaper.

ChilliWhizz

Original Poster:

12,443 posts

192 months

Thursday 10th August 2017
quotequote all
Thanks guys...

Good idea Graze thumbup

Steve Way came up with a good one (trimmer) but I'll try and find someone a bit more local that I can take the whole car to... smile