Diagnostic Equipment - Foxwell?
Diagnostic Equipment - Foxwell?
Author
Discussion

rocketboots999

Original Poster:

26 posts

109 months

Friday 13th October 2017
quotequote all
So now that my delivery issues have been satisfactorily taken care of, I finally consider that I own my first Aston. The process now starts for getting up to speed on certain items, the first one being the ability to diagnose issues when they arise. I have always tried to do my own maintenance on my fun cars.

I had hoped to use my Autel MD802 that did a good job for me interrogating my MB SL550 in lieu of getting SDS capability. Where it has the MB specific codes, it has nothing for Aston.

Does anyone have experience with using the Foxwell NT510 (loaded with the Aston codes) for both the OBD and body systems on a Vantage?

Thanks
______________
2010 Vantage V8 Roadster

rocketboots999

Original Poster:

26 posts

109 months

Saturday 2nd December 2017
quotequote all
So after more research and some feedback from the other site, I went ahead and purchased a Foxwell NT510. I got it through Amazon, rather than directly from the Foxwell site, in case of return issues. When it arrived, I went on the Foxwell site, registered, and downloaded my included car brand (Aston Martin). All went smoothly.

I tried it on the car this morning and it worked on both of the car's diagnostic plugs. It cleared a couple of minor codes, so I will see if they come back.

It even had an active mode on the ASM transmission where it physically checked the operation of the clutch and put the car into gear. I haven't checked the live data function yet.

Unlike my Autel MD802 (which works well on my other cars), Foxwell provides free software updates.

So far, so good.

Emilio Largo

770 posts

142 months

Saturday 2nd December 2017
quotequote all
Thanks for sharing. Might be helpful for me, too.

Charlie san

99 posts

166 months

Saturday 2nd December 2017
quotequote all
rocketboots999 said:
So after more research and some feedback from the other site, I went ahead and purchased a Foxwell NT510. I got it through Amazon, rather than directly from the Foxwell site, in case of return issues. When it arrived, I went on the Foxwell site, registered, and downloaded my included car brand (Aston Martin). All went smoothly.

I tried it on the car this morning and it worked on both of the car's diagnostic plugs. It cleared a couple of minor codes, so I will see if they come back.

It even had an active mode on the ASM transmission where it physically checked the operation of the clutch and put the car into gear. I haven't checked the live data function yet.

Unlike my Autel MD802 (which works well on my other cars), Foxwell provides free software updates.

So far, so good.
Thanks for sharing as I'm also very tempted to get one. I have an SRS Airbag service code that my local AM dealer wants £200/hour to look at... might as well just buy one?

Would you be super kind and check on your magic machine if it reads Airbag codes as well? You will be my guest for a super skinny latte in Goodwood! biggrin

Thanks for your help!



rocketboots999

Original Poster:

26 posts

109 months

Sunday 3rd December 2017
quotequote all
This video shows a run through of the different cars and modules covered. The Vantage is at about 3:23. Item #7 is the Restraints Control Module. I don't know if that will give you the whole story on the SRS.

https://www.youtube.com/watch?v=EXclAU5jyhg

Hope this helps.

EvoOlli

622 posts

194 months

Sunday 3rd December 2017
quotequote all
The NT510 Pro doesn't work with the newer cars with Bosch ECU, i.e. V12 Vantage S. It can't read the Engine ECU nor the ABS/DSC ECU. ASM is working, the same for some of the other ECUs.

I had a unit here, tried it on my car and sent it back, because currently Foxwell can't say if there will be an update for the newer cars.

Charlie san

99 posts

166 months

Sunday 3rd December 2017
quotequote all
rocketboots999 said:
This video shows a run through of the different cars and modules covered. The Vantage is at about 3:23. Item #7 is the Restraints Control Module. I don't know if that will give you the whole story on the SRS.

https://www.youtube.com/watch?v=EXclAU5jyhg

Hope this helps.
Thanks for your help mate,

After doing a bit of research there is a good chance that the RCM option will deal with my issue so I will take a plunge.

Charlie san

99 posts

166 months

Wednesday 13th December 2017
quotequote all
Just a heads up if anyone is similar situation, bought the diagnostic mashine as well. Also ha had a joy of clearing some minor codes, however my strange SRS message won't disappear. Weirdly it didn't even show up as a fault on the restrain systems, so just assuming it all works fine...