Facia trim/Central stack on Vanquish 2015 MY.
Discussion
Phil74891 said:
Maybe not much help, but I had piano black on my V8VS and now carbon on my V12VS. Piano black shows dust and scratches very easily. Also reflects light more on the top section. The carbon is so much better, so I would check out a few piano black ones first - if you haven’t already.
Ditto this, I’d stick with carbonAMDBSVNick said:
Hi Thanks for that info now how hard is it to change over?
Andy
Mr Tank said:
Hi
Thanks for that info now how hard is it to change over?
Andy
Hi Andy,Thanks for that info now how hard is it to change over?
Andy
I have watched it being done and is not something I would attempt myself but I'm sure it is pretty simple. I am useless at stuff like this.
I had one swapped out in our old DB9 having purchased a replacement ski slope form AMB. Just be careful as you may also need a fixing kit for the sat nav screen.
If I were you I would call James Hawkes-Reed for some advice as he whips them out on a daily basis!!! Top guy.
https://astoninstallations.com/author/astoninstall...
Nick
LordBretSinclair said:
I couldn't live with the piano black and changed to carbon. No "visible" dust and no horrid reflections.
I realise it's all personal preference but I would think very carefully before going for piano black

couldn't agree moreI realise it's all personal preference but I would think very carefully before going for piano black

dust and ease of scratching the issues for me
I find it amazing that in soon to be discontinued vantage, it was almost a secret that there is a Q part for the lower part of the console, in all CF - it doesn't appear in any of the brochures or CF packs
I know we’re talking Vanquish centre stack, but picking up on above I also agree full carbon fibre centre stack on 9/DBS/Vantage would be so much better.
Something like this...

...but with this also...
https://dna-engineering.com/Aston_Martin/Aston-mar...
I have full piano black centre in my DBS. I have changed the tricket lid from silver to piano black so the whole thing flows much better. It’s a shame the change to carbon fibre is so expensive.
Please share if you’ve had it done...
Something like this...
...but with this also...
https://dna-engineering.com/Aston_Martin/Aston-mar...
I have full piano black centre in my DBS. I have changed the tricket lid from silver to piano black so the whole thing flows much better. It’s a shame the change to carbon fibre is so expensive.
Please share if you’ve had it done...
Dobie177 said:
I know we’re talking Vanquish centre stack, but picking up on above I also agree full carbon fibre centre stack on 9/DBS/Vantage would be so much better.
Something like this...

...but with this also...
https://dna-engineering.com/Aston_Martin/Aston-mar...
I have full piano black centre in my DBS. I have changed the tricket lid from silver to piano black so the whole thing flows much better. It’s a shame the change to carbon fibre is so expensive.
Please share if you’ve had it done...
I've only had the top section done in CF so far but my intention is to do the whole thing. You don't have to pay OEM/Q prices either: http://www.divinatech.com/category-s/100.htmSomething like this...
...but with this also...
https://dna-engineering.com/Aston_Martin/Aston-mar...
I have full piano black centre in my DBS. I have changed the tricket lid from silver to piano black so the whole thing flows much better. It’s a shame the change to carbon fibre is so expensive.
Please share if you’ve had it done...
Not used these guys yet but I've heard the quality is excellent and whilst they don't do a manual version of the Centre Panel yet I'm sure it would be possible.
Mr Tank said:
Hi
Thanks for that info now how hard is it to change over?
Andy
I've not done it on the new console but it'll no doubt be similar to the 2009+ variant. So long as you don't have fists of ham and take your time it's pretty simple. I put tape on the leather to ensure the edges of the console didn't scratch it while pulling it out.Thanks for that info now how hard is it to change over?
Andy
V8V Pete said:
Dobie177 said:
I know we’re talking Vanquish centre stack, but picking up on above I also agree full carbon fibre centre stack on 9/DBS/Vantage would be so much better.
Something like this...

...but with this also...
https://dna-engineering.com/Aston_Martin/Aston-mar...
I have full piano black centre in my DBS. I have changed the tricket lid from silver to piano black so the whole thing flows much better. It’s a shame the change to carbon fibre is so expensive.
Please share if you’ve had it done...
I've only had the top section done in CF so far but my intention is to do the whole thing. You don't have to pay OEM/Q prices either: http://www.divinatech.com/category-s/100.htmSomething like this...
...but with this also...
https://dna-engineering.com/Aston_Martin/Aston-mar...
I have full piano black centre in my DBS. I have changed the tricket lid from silver to piano black so the whole thing flows much better. It’s a shame the change to carbon fibre is so expensive.
Please share if you’ve had it done...
Not used these guys yet but I've heard the quality is excellent and whilst they don't do a manual version of the Centre Panel yet I'm sure it would be possible.
https://www.vcollection.com/
I think if OP wants Piano rather than CF that's his choice
My Vanquish had Piano and I liked it, yes a pain to keep clean and stop all the smudges showing but did look great imo. I've got CF in my S and think I prefer it, but I could easily live with the Piano, go for it OP and enjoy 
My Vanquish had Piano and I liked it, yes a pain to keep clean and stop all the smudges showing but did look great imo. I've got CF in my S and think I prefer it, but I could easily live with the Piano, go for it OP and enjoy 
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff


