Alloy Repair
Author
Discussion

xnetco

Original Poster:

172 posts

143 months

Friday 20th October 2017
quotequote all
Hello.

I've had my alloys repair after a very small knock on the Channel Tunnel. The wheels have come back and there's a small imperfection on the rim and there is now a brushed effect on one of the spokes. Has anyone else experienced this?

Thanks

8Tech

2,221 posts

229 months

Friday 20th October 2017
quotequote all
Not if you get them refurbished by a reputable company!

BravoV8V

1,858 posts

205 months

Saturday 21st October 2017
quotequote all
If you want them done properly, send them back to Rimstock. They will come back with the actual OEM finish.

bogie

17,106 posts

303 months

Saturday 21st October 2017
quotequote all
Yeah, when I got my car 12 months ago (used from dealer) the wheels were recently refurbished by whoever had traded the car in and a few months later in winter they developed a bit of a cloudy effect in the lacquer. Likely due to imperfect prep before finishing.

The supplying dealer where I bought the car took the car back and had the wheels done FOC at their wheel refurb supplier, who warranty their work. They are perfect now still 12 months later.

So take em back to whoever did them or find a new better quality supplier......

BigMig

205 posts

142 months

Saturday 21st October 2017
quotequote all
I recently had my wheels refurbished and spoke to Rimstock, the response I got was that they no longer do refurbs for Joe public. I don't know if that means they will do them for dealers or anyone else?
I ended up going through my indie to get them done, with disappointing results. I'm still struggling to find a place that gets a job done right first time.

avinalarf

6,438 posts

173 months

Saturday 21st October 2017
quotequote all
I've used AutoWiz ( near Welwyn Garden City ).
For my alloys ,not an AM,they did a good job.
There were several Astons in there and I got the impression that a local AM main dealer used them for refurbs.

BravoV8V

1,858 posts

205 months

Saturday 21st October 2017
quotequote all
BigMig said:
I recently had my wheels refurbished and spoke to Rimstock, the response I got was that they no longer do refurbs for Joe public. I don't know if that means they will do them for dealers or anyone else.
You’re right. After a little bit of digging, Rimstock were recently sold to new owners (June 2017) so it looks like they have changed their policy:

“Working with OEM head offices and direct with the dealer networks”

http://www.rimstock.com/aftermarket/other-services

So, it looks like the OP might be able to go back to his AM dealer and insist that the wheel(s) go back to Rimstock. I’m guessing that Rimstock found it to be too much hassle to deal directly with the unwashed public.

Otherwise, you might be able to find an exchange wheel via their other site:

http://www.alloyxchange.co.uk/



8Tech

2,221 posts

229 months

Saturday 21st October 2017
quotequote all
I can recommend the following who I use regularly...

BJV Engineering for sets of wheels with a good finish at reasonable cost.

http://www.wheelrefurbishing.co.uk/

and if you require specialist refurbs on large wheels, ie diamond cut on 20" or split rims, then I use Lepsons who are more expensive but awesome.

http://www.lepsons.com/

HBradley

1,037 posts

212 months

Saturday 21st October 2017
quotequote all
If you're in London, Essex or Hertfordshire, I can thoroughly recommend Just Wheel Repair (www.justwheelrepair.co.uk) they did a fabulous job on a corroded diamond-turned alloy for my old V8VS. Collected the wheel & returned it in approx 5 days.

xnetco

Original Poster:

172 posts

143 months

Sunday 22nd October 2017
quotequote all
avinalarf said:
I've used AutoWiz ( near Welwyn Garden City ).
For my alloys ,not an AM,they did a good job.
There were several Astons in there and I got the impression that a local AM main dealer used them for refurbs.
Cheers. I'm going to try this place and it's just around the corner. Appreciate that.