V12V carbon discs
Discussion
Hi everyone!
So after finally putting some miles on my car, I noticed some steering wheel vibration that was uncomfortable. Before a long 400 mile journey, I balanced the the wheels the day before, to hopefully get rid of it, but during the trip, I noticed that it had actually gotten significantly worse! I then read on the forum about the need to balance the carbon discs (only on some cars, but the problem is more endemic to the earlier production ones, which mine is - number 77 off the line!). So on Monday I took the car to the Aston Martin service and they went ahead and balanced the wheels and discs. Unfortunately today when I went to pick the car up, I was told that the front discs are warped (eek!! one had -25g the other -40g) and that to totally eliminate the problem (it's improved greatly after their job, but still has vibration at 80mph and on braking), I need to replace them. Not the kind of news you want to hear with this car, as it equates to big bills...
...I was given an estimate of 12,000€ (9,000GBP) in parts, basically the discs and pads, to get the job done.
Not cool.
So now my quest beings...can anyone please direct me to the best and cheapest place where I can source a pair of V12V set of front discs and pads?
Preferably they'd be of the most recent type, where apparently from what I've read they are less problematic. How can you tell if they're old stock or new?
I've seen them at Astonmartinbits for 2,960 GBP each disc + 707 GBP for the pads, so a total of 6,627 GBP (a nice 2,373 GBP saving), but can they be had for less?
Astonmartinbits also sell used discs that they claim are in good condition...not really sure if this is a good option though...opinions? Are Astonmartinbits trustworthy? I've never used them...
Sorry for all the questions, but this wasn't the kind of problem that I needed after only a month with the car.
Thank you all for your help!
So after finally putting some miles on my car, I noticed some steering wheel vibration that was uncomfortable. Before a long 400 mile journey, I balanced the the wheels the day before, to hopefully get rid of it, but during the trip, I noticed that it had actually gotten significantly worse! I then read on the forum about the need to balance the carbon discs (only on some cars, but the problem is more endemic to the earlier production ones, which mine is - number 77 off the line!). So on Monday I took the car to the Aston Martin service and they went ahead and balanced the wheels and discs. Unfortunately today when I went to pick the car up, I was told that the front discs are warped (eek!! one had -25g the other -40g) and that to totally eliminate the problem (it's improved greatly after their job, but still has vibration at 80mph and on braking), I need to replace them. Not the kind of news you want to hear with this car, as it equates to big bills...
...I was given an estimate of 12,000€ (9,000GBP) in parts, basically the discs and pads, to get the job done.
Not cool.
So now my quest beings...can anyone please direct me to the best and cheapest place where I can source a pair of V12V set of front discs and pads?
Preferably they'd be of the most recent type, where apparently from what I've read they are less problematic. How can you tell if they're old stock or new?
I've seen them at Astonmartinbits for 2,960 GBP each disc + 707 GBP for the pads, so a total of 6,627 GBP (a nice 2,373 GBP saving), but can they be had for less?
Astonmartinbits also sell used discs that they claim are in good condition...not really sure if this is a good option though...opinions? Are Astonmartinbits trustworthy? I've never used them...
Sorry for all the questions, but this wasn't the kind of problem that I needed after only a month with the car.
Thank you all for your help!
These have previously been recommended to me although I have never used them.
https://surfacetransforms.com/aston-martin-brake-k...
https://surfacetransforms.com/aston-martin-brake-k...
mafisher said:
These have previously been recommended to me although I have never used them.
https://surfacetransforms.com/aston-martin-brake-k...
Thank you, but these are carbon discs that substitute the steel ones on the V8 Vantage. Mine's a V12V, already with carbon discs, and they're not much cheaper than the OEM ones for mine, but it's also a whole kit...I just need the discs and pads...https://surfacetransforms.com/aston-martin-brake-k...
Edited by RS6bird on Thursday 9th November 18:40
Cold said:
This is such a ridiculous situation to be in. No reason for these type of brakes on a street car apart from fashion.
That is a rather sweeping statement. Sure they come at a huge cost, but the benefits are significant even for daily driving. You are either ill informed or naïve if you think they are only of benefit on a race track, in fact most owners I know who track their cars regularly prefer steel brakes.Quick question, does anyone know if the DBS discs are 100% interchangeable with the V12V? The part numbers are identical bar the las letter, where it's a "D" for the V12V and a "B" for the DBS.
Also, let's not turn this thread on an argument for or against the carbon discs, they are what they are, I'm just after feedback on the sellers I mentioned, prices and any other potential site I may buy the parts.
I have the possibility of buying a set of DBS discs and pads, but need to know with 100% certainty that they are exactly the same...
Thanks everyone!
Also, let's not turn this thread on an argument for or against the carbon discs, they are what they are, I'm just after feedback on the sellers I mentioned, prices and any other potential site I may buy the parts.
I have the possibility of buying a set of DBS discs and pads, but need to know with 100% certainty that they are exactly the same...
Thanks everyone!
RS6bird said:
Hi everyone!
So after finally putting some miles on my car, I noticed some steering wheel vibration that was uncomfortable. Before a long 400 mile journey, I balanced the the wheels the day before, to hopefully get rid of it, but during the trip, I noticed that it had actually gotten significantly worse! I then read on the forum about the need to balance the carbon discs (only on some cars, but the problem is more endemic to the earlier production ones, which mine is - number 77 off the line!). So on Monday I took the car to the Aston Martin service and they went ahead and balanced the wheels and discs. Unfortunately today when I went to pick the car up, I was told that the front discs are warped (eek!! one had -25g the other -40g) and that to totally eliminate the problem (it's improved greatly after their job, but still has vibration at 80mph and on braking), I need to replace them. Not the kind of news you want to hear with this car, as it equates to big bills...
...I was given an estimate of 12,000€ (9,000GBP) in parts, basically the discs and pads, to get the job done.
Not cool.
So now my quest beings...can anyone please direct me to the best and cheapest place where I can source a pair of V12V set of front discs and pads?
Preferably they'd be of the most recent type, where apparently from what I've read they are less problematic. How can you tell if they're old stock or new?
I've seen them at Astonmartinbits for 2,960 GBP each disc + 707 GBP for the pads, so a total of 6,627 GBP (a nice 2,373 GBP saving), but can they be had for less?
Astonmartinbits also sell used discs that they claim are in good condition...not really sure if this is a good option though...opinions? Are Astonmartinbits trustworthy? I've never used them...
Sorry for all the questions, but this wasn't the kind of problem that I needed after only a month with the car.
Thank you all for your help!
Can I ask how old the car is and the mileage done?So after finally putting some miles on my car, I noticed some steering wheel vibration that was uncomfortable. Before a long 400 mile journey, I balanced the the wheels the day before, to hopefully get rid of it, but during the trip, I noticed that it had actually gotten significantly worse! I then read on the forum about the need to balance the carbon discs (only on some cars, but the problem is more endemic to the earlier production ones, which mine is - number 77 off the line!). So on Monday I took the car to the Aston Martin service and they went ahead and balanced the wheels and discs. Unfortunately today when I went to pick the car up, I was told that the front discs are warped (eek!! one had -25g the other -40g) and that to totally eliminate the problem (it's improved greatly after their job, but still has vibration at 80mph and on braking), I need to replace them. Not the kind of news you want to hear with this car, as it equates to big bills...
...I was given an estimate of 12,000€ (9,000GBP) in parts, basically the discs and pads, to get the job done.
Not cool.
So now my quest beings...can anyone please direct me to the best and cheapest place where I can source a pair of V12V set of front discs and pads?
Preferably they'd be of the most recent type, where apparently from what I've read they are less problematic. How can you tell if they're old stock or new?
I've seen them at Astonmartinbits for 2,960 GBP each disc + 707 GBP for the pads, so a total of 6,627 GBP (a nice 2,373 GBP saving), but can they be had for less?
Astonmartinbits also sell used discs that they claim are in good condition...not really sure if this is a good option though...opinions? Are Astonmartinbits trustworthy? I've never used them...
Sorry for all the questions, but this wasn't the kind of problem that I needed after only a month with the car.
Thank you all for your help!
That's one of the reasons Ive stayed away from cars with CC as that sort of cost is eye watering.
Hi!
Yes, the car is a 2009 with 25k miles. Never tracked and clean two owner car.
I'd get the discs refurbished, but as I am in Portugal, I don't know of anyone here that does that kind of service, and am not that keen on taking them off, shipping, trying them out, still have a problem...repeat. I say just pay and move on, but at least find the best deal out there!!
Thanks
Yes, the car is a 2009 with 25k miles. Never tracked and clean two owner car.
I'd get the discs refurbished, but as I am in Portugal, I don't know of anyone here that does that kind of service, and am not that keen on taking them off, shipping, trying them out, still have a problem...repeat. I say just pay and move on, but at least find the best deal out there!!
Thanks
Mate
Have a look at carbon resurfacing.
Google it, lots of info about it and people who have done it. Company called Sitcom do it, (no experience)
Its supposed to be 25% price of OEM, there is a thread on PH:
https://www.pistonheads.com/gassing/topic.asp?t=15...
Good luck!
Have a look at carbon resurfacing.
Google it, lots of info about it and people who have done it. Company called Sitcom do it, (no experience)
Its supposed to be 25% price of OEM, there is a thread on PH:
https://www.pistonheads.com/gassing/topic.asp?t=15...
Good luck!
Flugplatz said:
I destroyed my discs and pads in one day at Silverstone and have just replaced them.
I've done two track days, one organised by the Aston Martin dealer, another at Paul Ricard South of France by a main Porsche dealer (we were two V12VS, a Coupe and my Roadster among a sea of tuned Beetles!
).Both events fully supported with mechanics and instructors at hand.
My brakes and pads are fine after these two full day events.
I made sure to do a full cooling down lap before each session ended.
Ive been doing track days for 20 years so i do understand brakes need cooling but Ive since discovered that its a problem on all CCM equipped Vantages and the only way to go proper hard and still get home is to increase brake cooling with extra flow.
They are such a heavy car to slow down after that V12 has pushed you hard towards the horizon

As Swiss Toni writes...
Next is cooling. The simplest form is to get some brake ducting hose and tie wrap it securely in place. It’s best to remove the backing plates to allow cooling air to be directed at the disc/calliper (best is both). What is better is to fabricate or purchase backing plates that you can attach the brake duct to. You then need get the other end into a cool flow of air. Other than cutting holes in lower front bumper cover like the GT4’s. If you don’t want to do this you can simply have the ducting attached to lower wishbone with the end pointing forward into the airflow. Not ideal but likely better than nothing.
Edited by Flugplatz on Friday 10th November 13:59
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff


