Headlamp adjustment for continent
Discussion
There are other threads, but none with pictures.... so here goes!
Has anyone had the headlight adjuster modification done for an easy-reach adjustment? I have read in numerous places something about a cable allowing for an easier adjustment. I am just wondering which dealers have done this, and if there's any handbook/photos/guide on doing so? I'm hoping that my local dealer could fit such a system for my car.
Photos of such a system would be great, and/or the location of the adjustment switches... which I hear is a wheel off job?
2006 V8 Vantage
Has anyone had the headlight adjuster modification done for an easy-reach adjustment? I have read in numerous places something about a cable allowing for an easier adjustment. I am just wondering which dealers have done this, and if there's any handbook/photos/guide on doing so? I'm hoping that my local dealer could fit such a system for my car.
Photos of such a system would be great, and/or the location of the adjustment switches... which I hear is a wheel off job?
2006 V8 Vantage
Hello there
I've done this a few times, and due to space constraints it is a lot easier with the front wheels off. Take the plastic wheel arch liner out by removing the black plastic screw and sliding it out of the slot. You will then see a black shiny panel held in by two brass screws. Take this off and then you have access to the deflector flick levers, there is no need to remove anything else so do not disturb the bulb holders.
The drivers side is easier than the passenger side to get to, I suggest you start with that side to get the idea. Once the shiny panel is off you will see the levers but will need a fine torch, especially on the passenger side and you need to get your head into the wheel arch. The passenger one is located deep in a slot and you will need a fine screw driver to flick it up. I'm sorry I haven't got pictures, may be next time I will do some! There is also a good description of this in the FAQs in this forum which may help with any omissions I have left.
Good luck!
I've done this a few times, and due to space constraints it is a lot easier with the front wheels off. Take the plastic wheel arch liner out by removing the black plastic screw and sliding it out of the slot. You will then see a black shiny panel held in by two brass screws. Take this off and then you have access to the deflector flick levers, there is no need to remove anything else so do not disturb the bulb holders.
The drivers side is easier than the passenger side to get to, I suggest you start with that side to get the idea. Once the shiny panel is off you will see the levers but will need a fine torch, especially on the passenger side and you need to get your head into the wheel arch. The passenger one is located deep in a slot and you will need a fine screw driver to flick it up. I'm sorry I haven't got pictures, may be next time I will do some! There is also a good description of this in the FAQs in this forum which may help with any omissions I have left.
Good luck!
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff



