Easy Vantage audio interface upgrade.
Discussion
So, I wanted to update the audio system in the Vantage, it’s a 2009 and has the premium sound system which is fantastic when I’m not listening to the Quicksilver 200 cell cats trying to generate a noise abatement order. But when streaming music through your phone, the interface is not good and needs updating.
One solution is to update the Bluetooth but at over 800 pounds it is a little steep and you’re still left with an antiquated user experience.
What you want is iphone music integration at just a finger tip away without cluttering up the Aston’s centre stack. The solution is so simple, why I didn’t think of it sooner, I’ll never know.
Basically, all I’ve done is extend the iphone plug in the armrest, down the centre console, under the steering wheel, and out just under the drivers side air vent.
Here I have a flush fitting magnetic phone attachment. The phone is now in view, charges, and connects to the sound system through the ipod option. It really is a great solution which is both invisible and really really handy. Not only for music, but all the other useful apps. And the cost, around £14.00 plus an hour at the most of your time.
This is how I did it, plus some step by step pictures should you want to do the same.
First off you’ll need to search ebay for two 1m 8pin lightning Male to Female extension Cables and one Universal in car magnetic air vent holder.
You’ll need to take out the centre console, it’s really easy, and has been covered a number of times on the forum, here’s my rendition saving a search.
Behind the armrest there’s a cover hiding two torque screws, using a rounded blunt knife to gain access, lift out the panel. It’s bendy, be careful not to scratch the leather. Once this is out you’ve done the hardest part.
Now lift out the shelf behind the seats, this will reveal the screws for the alloy trim running across the back. Unscrew these as well as the one bolt at the end and remove. Why there’s one bolt I don’t know, maybe someone here can explain.
Now unscrew the two torque screws under the little leather panel you just removed.
Then remove the rubber drinks holder matt, here you’ll find another two screws, undo these a few turns, you just want to loosen them, not take them out.
The armrest should now be loose. Simply give it a little jolt backwards and it’ll lift up.
Be careful here as there are three cables that’ll need to be removed as they’re not very long and you physically need to remove the armrest from the car, more on that later.
Once the armrest is removed from the car you’ll see two screws holding down the metal panel surrounding the gearstick section. Remove these and once again pull the unit back. Now, something very important! Have a cloth ready to protect the bottom section of the console dash as there are two locating metal extrusions which are very sharp and they will cause scratches if you don’t cover them quickly. I’ll say it again, they will scratch your dash unless you cover them.
Now take the centre console out of the car to somewhere clean and tidy, kitchen table is ideal, especially whilst the misses isn’t home.
The mini jack, usb and phone/ipod integration connection unit needs to be taken apart so you can slip in the new iphone extension cable. Once again it’s simple. Unscrew the four tiny screws and take out the metal panel.
Now get your drill out with a 4mm drill bit, and after punching it with a guide, drill a hole as I have done, close to the side so you can file it smooth and let the cable through. Unless you’re sitting in the boot, you’ll never see the hole you’ve made, so don’t worry.
After threading the cable through, making sure it’s the right end, screw the panel back in place. Then put the armrest back in the car and thread the cable down the side of the centre tunnel and out towards your feet.
Right, you’re nearly there.
Next, flip up the air vent, it’s not screwed in so simply lifts up with a little force.
Now thread your other cable down under the vent, again towards your feet. Connect the two cables, hide and cable tie them to the trim .
Now, before you reverse the whole dismantling sequence, plug your phone in to see if it all works. Then put it all back together.
There you have it. Easy access iphone music integration, next to your steering wheel in what I think, the most unobtrusive area of the cabin.
Hope this is of use to someone.

One solution is to update the Bluetooth but at over 800 pounds it is a little steep and you’re still left with an antiquated user experience.
What you want is iphone music integration at just a finger tip away without cluttering up the Aston’s centre stack. The solution is so simple, why I didn’t think of it sooner, I’ll never know.
Basically, all I’ve done is extend the iphone plug in the armrest, down the centre console, under the steering wheel, and out just under the drivers side air vent.
Here I have a flush fitting magnetic phone attachment. The phone is now in view, charges, and connects to the sound system through the ipod option. It really is a great solution which is both invisible and really really handy. Not only for music, but all the other useful apps. And the cost, around £14.00 plus an hour at the most of your time.
This is how I did it, plus some step by step pictures should you want to do the same.
First off you’ll need to search ebay for two 1m 8pin lightning Male to Female extension Cables and one Universal in car magnetic air vent holder.
You’ll need to take out the centre console, it’s really easy, and has been covered a number of times on the forum, here’s my rendition saving a search.
Behind the armrest there’s a cover hiding two torque screws, using a rounded blunt knife to gain access, lift out the panel. It’s bendy, be careful not to scratch the leather. Once this is out you’ve done the hardest part.
Now lift out the shelf behind the seats, this will reveal the screws for the alloy trim running across the back. Unscrew these as well as the one bolt at the end and remove. Why there’s one bolt I don’t know, maybe someone here can explain.
Now unscrew the two torque screws under the little leather panel you just removed.
Then remove the rubber drinks holder matt, here you’ll find another two screws, undo these a few turns, you just want to loosen them, not take them out.
The armrest should now be loose. Simply give it a little jolt backwards and it’ll lift up.
Be careful here as there are three cables that’ll need to be removed as they’re not very long and you physically need to remove the armrest from the car, more on that later.
Once the armrest is removed from the car you’ll see two screws holding down the metal panel surrounding the gearstick section. Remove these and once again pull the unit back. Now, something very important! Have a cloth ready to protect the bottom section of the console dash as there are two locating metal extrusions which are very sharp and they will cause scratches if you don’t cover them quickly. I’ll say it again, they will scratch your dash unless you cover them.
Now take the centre console out of the car to somewhere clean and tidy, kitchen table is ideal, especially whilst the misses isn’t home.
The mini jack, usb and phone/ipod integration connection unit needs to be taken apart so you can slip in the new iphone extension cable. Once again it’s simple. Unscrew the four tiny screws and take out the metal panel.
Now get your drill out with a 4mm drill bit, and after punching it with a guide, drill a hole as I have done, close to the side so you can file it smooth and let the cable through. Unless you’re sitting in the boot, you’ll never see the hole you’ve made, so don’t worry.
After threading the cable through, making sure it’s the right end, screw the panel back in place. Then put the armrest back in the car and thread the cable down the side of the centre tunnel and out towards your feet.
Right, you’re nearly there.
Next, flip up the air vent, it’s not screwed in so simply lifts up with a little force.
Now thread your other cable down under the vent, again towards your feet. Connect the two cables, hide and cable tie them to the trim .
Now, before you reverse the whole dismantling sequence, plug your phone in to see if it all works. Then put it all back together.
There you have it. Easy access iphone music integration, next to your steering wheel in what I think, the most unobtrusive area of the cabin.
Hope this is of use to someone.
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff


