DB9 7 Slate Clip In Issue
DB9 7 Slate Clip In Issue
Author
Discussion

a98pmalcolm

Original Poster:

213 posts

108 months

Thursday 14th December 2017
quotequote all
Hi all,

I was wondering if anyone has any tips of clipping in the individual front grille slats.

When I bought the car they where never clipped all the way in. And they just were not going on.

So I removed them all and got 3 on perfectly by removing the rad cover and prising the slate open by twisting a flat head screw driver while pushing on the slat.

But for the life me I can't do the others. The slat just will not go over the clips.

a98pmalcolm

Original Poster:

213 posts

108 months

Friday 15th December 2017
quotequote all
Quick update if any one searches in Future,

Used massive snap on grips to press the grill into the clips using a plastic trim tool between the grips and chrome to protect it.

The ends of the grill did not remain clipped in so we used tiny self tapping screws either ends to open the clips into the grill and its solid!
The clips in the middle section held the grill fine without needing screws.

Excuse the mucky looking grill, the car is filthy at the moment lol



telum01

987 posts

146 months

Friday 15th December 2017
quotequote all
Another option is a tiny dab of superglue on the backside of each connection between the slats and vertical pieces.