Another garage build.
Discussion
I thought I'd share the garage build so far.
For moving into the new house and the first part of the build, I had to store the V12 in my factory. Once I got it home and put it up on the lift out of the way, there was no room to get it down.
The downside is I haven't been able to get it out for a run for nearly 6 months so I'm glad its nearly over. Oh yeah, then the crap weather comes. Well, at least the mileage will stay low!!
It's been a hell of a lot of hard work and stupidly decided to do it all myself (with the help of the son-in-law). It was made even harder by the previous owner not having a clue when it comes to building. There were no soffits on the building and it was left like that for years and the RSJ's were bare steel (rust by the time I got to rescue them). Even the roller shutter doors were not only assembled wrong, but put in back to front. Yup, up is down and down is up. Muppet. If he touched it, I've had to fix it or replace it. That made the project as much a rework and rescue as much as a man-cave build.
Should be finished just after Chrimbo when all the cupboards and storage are delivered.
https://spark.adobe.com/page/2cC3MxDEc4Tj3/

For moving into the new house and the first part of the build, I had to store the V12 in my factory. Once I got it home and put it up on the lift out of the way, there was no room to get it down.
The downside is I haven't been able to get it out for a run for nearly 6 months so I'm glad its nearly over. Oh yeah, then the crap weather comes. Well, at least the mileage will stay low!!
It's been a hell of a lot of hard work and stupidly decided to do it all myself (with the help of the son-in-law). It was made even harder by the previous owner not having a clue when it comes to building. There were no soffits on the building and it was left like that for years and the RSJ's were bare steel (rust by the time I got to rescue them). Even the roller shutter doors were not only assembled wrong, but put in back to front. Yup, up is down and down is up. Muppet. If he touched it, I've had to fix it or replace it. That made the project as much a rework and rescue as much as a man-cave build.
Should be finished just after Chrimbo when all the cupboards and storage are delivered.
https://spark.adobe.com/page/2cC3MxDEc4Tj3/
I am puzzled.
Some time ago you described the construction of your garage (photo on your profile page).
In this topic, is it the same garage which has now been split into 'workshop' and 'showroom', or have you perhaps moved home?
The curved walls looked quite special, but I then realised it is a 'trick' of the camera.
DapperDanMan said:
That looks superb.
Are the cupboards IKEA METOD high kitchen cabinets?
Indeed! 2m tall cabinets with 400mm wall cabinets on top. I really wanted an absolutely clean look with no door furniture.Are the cupboards IKEA METOD high kitchen cabinets?
They needed significant modification to recess the TV into them. The door below has a nice little multimode amp set into it taking optical input from the TV, bluetooth and a couple of other line in to drive the ceiling speakers. I think there is an expandable pic in the Adobe link at the start of the thread that shows inside them. What it doesn't show is the frickin nightmare of cabling to get everything interconnected neatly.
Jon39 said:
I am puzzled.
Some time ago you described the construction of your garage (photo on your profile page).
In this topic, is it the same garage which has now been split into 'workshop' and 'showroom', or have you perhaps moved home?
The curved walls looked quite special, but I then realised it is a 'trick' of the camera.
I have just moved and this is a different garage. But....we still have the other one......
Edited by divetheworld on Tuesday 2nd January 23:44
Just about to get quotes to widen the door opening into my garage (as the DB9 is too wide to fit through the 1938 designed doors). I'm planning a clear opening from frame to frame of 2455mm, which should give me a clearance of 200mm (8 inches) each side from the wing mirror to the frame. How wide is the opening in other people's single garages?
westhumbler said:
Just about to get quotes to widen the door opening into my garage (as the DB9 is too wide to fit through the 1938 designed doors). I'm planning a clear opening from frame to frame of 2455mm, which should give me a clearance of 200mm (8 inches) each side from the wing mirror to the frame. How wide is the opening in other people's single garages?
Each opening is 2200mm wide, a bit tight at the mirrors but no probs 
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff



