Vantage from the USA / Xenon headlamp difference?
Discussion
Hi all!
I am new to PH so I would like to introduce myself first (I don't know if there is a dedicated post for that, sorry). I am a French classic / sports car enthusiast and passionate about mechanics! I try to do maintain / restore all my cars by myself in my own workshop / garage. I believe you should see the list of my cars under my name - I will add if not.
I turned 40 this year and offered myself my dreamcar which is a 2007 Aston Martin V8 Vantage and feel so happy about that! Only difficulty is that the car was manufactured to US specifications and I have troubles registering it in France... So frustrating to have the car stucked in the garage...
I have received a "Partial Certificate of Conformity" from AM, listing the 5 points that are not complying to EU rules:
- Back REG plate support --> should not be a problem for French administration
- Locking remote system frequency is different --> should not be a problem for French administration
- Odometer is in MPH --> should not be a problem for French administration since there is also an electronic indicator that can be switched to KPH
- Side mirror glasses --> I discovered that they are flat in the US and convex in Europe! I found adhesive convex glasses on Ebay, should do the job. BTW, would be nice if you could confirm that DB9 and AMV8 have the same glasses as I could see from Ebay: https://goo.gl/7eEWdE
- Front headlamp assy --> This is where the problems might be harder to solve... Not really sure what the difference is between Fed and EU... I have Xenon lamps, and I read somewhere that may be there is no automatic leveling system. anyone could confirm? And if this is the case, do you think I could easily install a leveling system rather than buying new headlamps, which I believe would cost a hell of money?
Thanks in advance for your help!
Fred

I am new to PH so I would like to introduce myself first (I don't know if there is a dedicated post for that, sorry). I am a French classic / sports car enthusiast and passionate about mechanics! I try to do maintain / restore all my cars by myself in my own workshop / garage. I believe you should see the list of my cars under my name - I will add if not.
I turned 40 this year and offered myself my dreamcar which is a 2007 Aston Martin V8 Vantage and feel so happy about that! Only difficulty is that the car was manufactured to US specifications and I have troubles registering it in France... So frustrating to have the car stucked in the garage...
I have received a "Partial Certificate of Conformity" from AM, listing the 5 points that are not complying to EU rules:
- Back REG plate support --> should not be a problem for French administration
- Locking remote system frequency is different --> should not be a problem for French administration
- Odometer is in MPH --> should not be a problem for French administration since there is also an electronic indicator that can be switched to KPH
- Side mirror glasses --> I discovered that they are flat in the US and convex in Europe! I found adhesive convex glasses on Ebay, should do the job. BTW, would be nice if you could confirm that DB9 and AMV8 have the same glasses as I could see from Ebay: https://goo.gl/7eEWdE
- Front headlamp assy --> This is where the problems might be harder to solve... Not really sure what the difference is between Fed and EU... I have Xenon lamps, and I read somewhere that may be there is no automatic leveling system. anyone could confirm? And if this is the case, do you think I could easily install a leveling system rather than buying new headlamps, which I believe would cost a hell of money?
Thanks in advance for your help!
Fred
Welcome Fred.
Your Vantage looks very good, and your list shows a great selection of some interesting British cars.
The regulations that you mention, seem to be mostly about fairly minor matters. You may have heard about our 2016 referendum. I think EU regulations were mentioned a few times.
Sometimes a group of Aston Martin enthusiasts from France post on here. You might be able to contact them for help. I think their group is called Aston Passion. .
Bonjour Fred,
the light pattern for a EU LHD is like that

EU RHD is the opposit and the federal beam is flat.
Comme dis précédemment je t'invite a consulter le forum Aston Passion http://astonpassion.com/
the light pattern for a EU LHD is like that
EU RHD is the opposit and the federal beam is flat.
Comme dis précédemment je t'invite a consulter le forum Aston Passion http://astonpassion.com/
SS972 said:
Bonjour Fred,
the light pattern for a EU LHD is like that

EU RHD is the opposit and the federal beam is flat.
Comme dis précédemment je t'invite a consulter le forum Aston Passion http://astonpassion.com/
Yes, and I have registered a few USA vehicles here in the UK, with the flat beam being no problem.the light pattern for a EU LHD is like that
EU RHD is the opposit and the federal beam is flat.
Comme dis précédemment je t'invite a consulter le forum Aston Passion http://astonpassion.com/
Thanks for all your messages. FYI, below is answer I received from Mr Wiles, in charge of homologations at AM:
"From a technical point of view there is very little difference between US and EU headlamps and from an actual operational/function perspective no discernible difference. The only problem is that I believe the lamps carry unique Certification markings (“DOT” / “SAE” for USA and “E” / “e” for Europe).
Unfortunately it is my experience that vehicle inspectors in the EU typically look for the European Type Approval markings to ensure compliance.
I have looked at our records to see if there is a possibility that the lamps had been dual marked with both USA and EU marks but could not determine this."
--> I checked on my car but unfortunately no E marking... Just the US codes
"From a technical point of view there is very little difference between US and EU headlamps and from an actual operational/function perspective no discernible difference. The only problem is that I believe the lamps carry unique Certification markings (“DOT” / “SAE” for USA and “E” / “e” for Europe).
Unfortunately it is my experience that vehicle inspectors in the EU typically look for the European Type Approval markings to ensure compliance.
I have looked at our records to see if there is a possibility that the lamps had been dual marked with both USA and EU marks but could not determine this."
--> I checked on my car but unfortunately no E marking... Just the US codes
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff


