Do carbon ceramic brakes make a noise at low speed
Do carbon ceramic brakes make a noise at low speed
Author
Discussion

shuzzy

Original Poster:

294 posts

245 months

Sunday 7th January 2018
quotequote all
Not sure if this is normal or not. I have a 2013 DB9 with ceramic brakes and when braking at low speeds I can hear a noise. Hard to describe but its like a whirring ish type sound. Anybody else notice this noise, not sure if it's normal or not for ceramics. Checked my pads and there appears to be plenty of life in them. No noises audible at speeds above 15 mph or so.

Regards

anonymous-user

85 months

Sunday 7th January 2018
quotequote all
If they sound a bit grindy then mine do the same (14 db9).

Just need to warm up a bit I find.

GameofCars

850 posts

140 months

Sunday 7th January 2018
quotequote all
When I had my 997 turbo with CCB's they did often squeak when braking at low speeds. This is apparently normal. I did find it annoying tbh.

ashway

533 posts

196 months

Sunday 7th January 2018
quotequote all
I had PCCBs on a 911Turbo and when cold at low speed they were noisy, by contrast the Vanquish is much quieter albeit there is still a noise at low speed.

RS6bird

72 posts

109 months

Sunday 7th January 2018
quotequote all
Yes, very normal. Not sure the exact year the CCBs went from gen 1 to gen 2, but that also improved things significantly. Please see my thread on my recent change of discs on my V12V. You can tell the generation of the disc by their part number.

superlightr

12,920 posts

294 months

Monday 8th January 2018
quotequote all
RS6bird said:
Yes, very normal. Not sure the exact year the CCBs went from gen 1 to gen 2, but that also improved things significantly. Please see my thread on my recent change of discs on my V12V. You can tell the generation of the disc by their part number.
I believe it to be for the 2013MY face lift db9.

The Virarge talks about Gen1 and then the 2013 MY DB9 is the later CCB /CCM but not sure if that's Gen 2 or Gen 3 see some conflicting info on this. But it should not be Gen 1 brakes anyway.

RS6bird

72 posts

109 months

Monday 8th January 2018
quotequote all
Here is a link to my old thread:
https://www.pistonheads.com/gassing/topic.asp?h=0&...

On the V12V, there were only Gen 1 and Gen 2 discs that I am aware. I recently changed them to the current ones being used in the latest V12VS. The part numbers are on my thread, and the initial number sequence should be the same for the Vantage and the V12V.


shuzzy

Original Poster:

294 posts

245 months

Wednesday 10th January 2018
quotequote all
Great thanks for the information chaps, does reassure me.

DAVIDOXE

495 posts

145 months

Wednesday 10th January 2018
quotequote all
Mine are the same so glad to see this.

shuzzy

Original Poster:

294 posts

245 months

Friday 11th May 2018
quotequote all
Just an update on this, my car went in for some work recently. I was notified at this time that my front brake pads were worn out. Even though it appears there is still material left on the pads, the supporting pins were exposed and rubbing against the disc. Worryingly the low pad warning light was not illuminated either. Anyway continuing with the pads would jeopardize my discs as the pins had started marking the discs. Not wanting to risk my discs the pads were replaced straight away (at an expected eye watering cost). I can state I no longer have any noise at low speed now. There is nothing at all, so not sure what was going on before.

Just be wary if you have ceramic brakes the pads may need replacing sooner than you think.

awg454

505 posts

247 months

Friday 11th May 2018
quotequote all
How many miles had the pads done if you don’t mind me asking

AdamV12V

5,314 posts

208 months

Friday 11th May 2018
quotequote all
shuzzy said:
the pads were replaced straight away (at an expected eye watering cost).
I thought the pads were only about £600-£700 or so for a set? How much did you get charged if you don't mind me asking?

BamfordMike

1,192 posts

188 months

Friday 11th May 2018
quotequote all
AdamV12V said:
I thought the pads were only about £600-£700 or so for a set? How much did you get charged if you don't mind me asking?
Yeah, that used to be about the price, but Aston parts prices generally are continually on the rise, some parts are becoming eye watering, so a constant check to see latest price update for any part is always needed these days.

List price for pads (exc vat) is now £731.64, + about an hour / hour and half labour to install and bed-in so in region of £875-£950 seems fair enough depending on if at indie or franchised (don’t forget CCM calipers need removing from upright to fit the pad whereas to change pads on steel brakes is simple pin removal keeping calliper on upright meaning not much labour).

I’ve seen plenty of cases of what’s being described here, where the mounting pins wear through the pad yet the wear lead indicator is not flashing alarm bells on dashboard. The tell tale sign without stripping calliper to look at pads directly is to look out for scoring witness marks on the disc.

The pads in the pic didn’t ping the wear light. The pad area where the wear indicator sits is fine, the leading edges of the pad are worn lower.
One of the pads can be argued that the wear indicator didn’t ping because corrosion has crumbled the pad material away and that is the reason for the exposed pin. However the other pad shows worn surface without any corrosion crumbling and the pin is exposed and wearing on the disc without a wear light ping. Design fault?




Zod

35,295 posts

289 months

Friday 11th May 2018
quotequote all
Mine start to squeak a month or so after the car has had a few days of intensive driving, followed my mostly town driving.

cayman-black

13,268 posts

247 months

Friday 11th May 2018
quotequote all
Oh yes, Zod you pads are fked, get new ones in now!

Zod

35,295 posts

289 months

Saturday 12th May 2018
quotequote all
cayman-black said:
Oh yes, Zod you pads are fked, get new ones in now!
I had them replaced twice in the first three years! The lads are fine. The discs are lovely, shiny and smooth.

shuzzy

Original Poster:

294 posts

245 months

Sunday 13th May 2018
quotequote all
Thanks for the detailed explanation Bamford Mike. My car has done 28k miles but not sure if the pads have ever been replaced by a previous owner. Just need to try and stop the annoying squealing that keeps coming back.

BamfordMike

1,192 posts

188 months

Tuesday 22nd May 2018
quotequote all
Re the previous post detailing mounting pin breakthrough but no illumination of wear indicator light on dashboard concerning the front pads, here is rear pad status

New pad thickness = 9.5mm
Bronze pin breakthrough = @ 5mm
But
Wear light illumination = @ 3mm

From pics: whilst the pad thickness on rear pads when the pins breakthrough looks meaty, the pad is actually on wear limit 2mm before light comes on at 5mm thickness. That 2mm usage equates to a fair chunk of mileage scrubbing bronze pins on disc. Design fault? User beware!




CSK1

1,833 posts

155 months

Tuesday 22nd May 2018
quotequote all
Mine's in for a service and the Performance Pack. Front pads are worn over 50% and the service manager advised to change them.

JaseB

930 posts

292 months

Tuesday 22nd May 2018
quotequote all
BamfordMike said:
Re the previous post detailing mounting pin breakthrough but no illumination of wear indicator light on dashboard concerning the front pads, here is rear pad status

New pad thickness = 9.5mm
Bronze pin breakthrough = @ 5mm
But
Wear light illumination = @ 3mm

From pics: whilst the pad thickness on rear pads when the pins breakthrough looks meaty, the pad is actually on wear limit 2mm before light comes on at 5mm thickness. That 2mm usage equates to a fair chunk of mileage scrubbing bronze pins on disc. Design fault? User beware!



Well done Mike, thanks for spotting that, I'm glad you know what you're looking for!!

Yet again you've saved me (more than) a few quid!

Edited by JaseB on Tuesday 22 May 11:13