Parking Sensors
Author
Discussion

samastonlongley

Original Poster:

171 posts

121 months

Sunday 28th January 2018
quotequote all
The parking sensors on my 2006 Vantage for the most part, don’t work, as soon as I select reverse I just get a solid beep and that’s it. However every no and again they do work providing a faint beep when I get closer to an object, as you would expect. I initially assumed that maybe the sensors in the bumper were faulty however im now not so sure as they do work just not often! Has anyone experienced this before or does anyone have any idea what it could be?

Thanks in advance!

Veg

520 posts

314 months

Sunday 28th January 2018
quotequote all
Mine do exactly the same and I haven't figured it out yet either. Like you I think the sensors are ok or maybe one is dragging the others down bur what do I know!

bogie

17,108 posts

303 months

Sunday 28th January 2018
quotequote all
I had that once, it was water ingress. Ended up replacing a couple of sensors

RS6bird

72 posts

109 months

Sunday 28th January 2018
quotequote all
My V12V did that once. It's probably a faulty sensor. Mine was just that and once it was replaced, works as it should. I recall it being pretty cheap too.

Big Ry

1,682 posts

150 months

Sunday 28th January 2018
quotequote all
Same thing on my RR, water damaged sensor made it go all wonky and tell me I was about to hit something despite there being nothing for about 40 yards.

Should be a simple enough fix.

samastonlongley

Original Poster:

171 posts

121 months

Sunday 28th January 2018
quotequote all
If it’s is water ingress, how will I know which one has suffered the damage. I’m guessing to replace them it’s a bumper off job? Wonder if they can be dried out maybe?

Big Ry

1,682 posts

150 months

Sunday 28th January 2018
quotequote all
I'd say the jobs buggered to be honest and the sensor(s) would need replacing. Yes it's a bumper off job, but then I suspect you'd be able to see which one or ones are affected.

Mine one was simple to see as the sensor all started to bubble like it was corroded (well I guess that's exactly what it was).

johnnyBv8

2,482 posts

222 months

Sunday 28th January 2018
quotequote all
samastonlongley said:
If it’s is water ingress, how will I know which one has suffered the damage. I’m guessing to replace them it’s a bumper off job? Wonder if they can be dried out maybe?
Put the car in reverse and then put your ear next to each one in turn. If it's like other brands you should hear a very faint clicking if they're working....that's how I worked out which sensor was playing up on a BMW 5 series I had.

RS6bird

72 posts

109 months

Sunday 28th January 2018
quotequote all
My car had no water damage, it was fine one day and then all of a sudden, no rain or anything else, it just gave up the ghost. At AM service, they could see which one was off when they hooked up the computer to the car. Apparently another one in the front was faulty too. They replaced both (one of them needed painting). Haven't had an issue since.