Vantage roadster - vibration under braking
Vantage roadster - vibration under braking
Author
Discussion

phib

Original Poster:

4,520 posts

290 months

Friday 16th February 2018
quotequote all
Hi all,

I have started my own thread on this rather than hijack anyone else’s.

My potentially new to me vantage roadster had its timeless 140 point check yesterday

It all was pretty good as I thought it would be, however on the test drive I noticed a bad vibration under braking feedback through the steering wheel. At 70mph at 100+ I cant image what it would be like.

Didn’t notice anyother symptoms.

Now it has 20 inch DBS wheels on it.

Aston are saying it’s that it’s beceause of the wheels. But still meets their timeless standard.

I really can’t believe this at all. The 20 inch forged alloys are lighter than the standard vantage wheel anyway so that doesn’t make sense.

Is there any history or anything specifically I should ask about ?

My initial thought was warped discs, buckled wheel ( doesn’t make too much sense as it’s under braking) or bushes ?

Any advice very welcome as I have to speak to their tech today on it.

I could just walk away but it’s the perfect colour, spec and deal for me.

Thanks

Phib

superlightr

12,920 posts

294 months

Friday 16th February 2018
quotequote all
walk - there is always another..

Manx V8V

482 posts

113 months

Friday 16th February 2018
quotequote all
Has it been standing unused for a while?

Dont hand over your money until it's sorted.

rovcallum

553 posts

174 months

Friday 16th February 2018
quotequote all
Warped discs seems like the obvious cause.
I'd insist on their tech checking them.

If nothing can be found - walk away.
If it's something they can fix for you - get it bought.

Manx V8V

482 posts

113 months

Friday 16th February 2018
quotequote all
I would say a sticking piston if it's been standing, either way it's not normal and the dealer knows that.

ds666

3,185 posts

210 months

Friday 16th February 2018
quotequote all
If it is only under braking then it is likely to be warped discs . Not sure if these would be covered under a warranty .

Big Ry

1,682 posts

150 months

Friday 16th February 2018
quotequote all
If there's doubt there's no doubt........

If you're having possible issues before you've even parted with your heard earned then that wouldn't sit well with me.

I'm quite surprised that a MD would say it's "acceptable" for judder at 70mph due to the wheels, sounds and smells like bullst to me.

johnnyBv8

2,482 posts

222 months

Friday 16th February 2018
quotequote all
If they're telling you it's the wheels, get them to swap the 20" wheels with a 19" set and see if the issue persists.

You'd expect any vibrating issue with the wheels to manifest independently of braking, so it does sound like it's something else....sticking caliper maybe. Discs can warp but it's actually pretty rare on any car.

Either way, you need to get them to resolve it. I know you've been looking for a while, so whilst some are suggesting to walk away, it's hard to find the car you want so unless the dealer is being unhelpful I would give them a chance to resolve.

RobDown

3,807 posts

159 months

Friday 16th February 2018
quotequote all
The wheels? Only under braking? Can someone explain to me how that would be possible? Genuine question because I can’t see how that would work

Warped brake discs would be my starting point too for investigation

johnnyBv8

2,482 posts

222 months

Friday 16th February 2018
quotequote all
RobDown said:
The wheels? Only under braking? Can someone explain to me how that would be possible? Genuine question because I can’t see how that would work

Warped brake discs would be my starting point too for investigation
It's very unlikely - the vibration from wheel damage would be speed related, not braking related. It's very difficult to warp brake discs - even on a track...what people perceive to be warped discs is usually uneven build up of pad material. Worn bushes can feel similar, but they should've picked that up on their checks!

As above, I'd call their bluff on a wheel swap!

Big Ry

1,682 posts

150 months

Friday 16th February 2018
quotequote all
johnnyBv8 said:
As above, I'd call their bluff on a wheel swap!
Seems like a reasonable approach to me too. If they genuinely believe it's the wheels then they should have no issue in proving it. If they're reluctant, then you already have your answer.......

Sebastian Tombs

2,161 posts

223 months

Friday 16th February 2018
quotequote all
It could be the ABS kicking in when it shouldn't.
My DB9 intermittently seems to have that issue at the moment.

Manx V8V

482 posts

113 months

Friday 16th February 2018
quotequote all
The ABS should felt mainly through the pedal.

phib

Original Poster:

4,520 posts

290 months

Friday 16th February 2018
quotequote all
Well, I spoke to tech tech today and he couldn't have been helpful, effectively I will go and spend some time with the tech next week and we drive it then swap over wheels and drive again until I am happy.

He thinks it could also be an issue with the fact the car may have stood for a while and tyres flatspotted, they have also agreed to change all the tyres out.

So hopefully I will go early next week and get this sorted as its the only issue with the car.

I think when I said I would bring my own workshop mat and started talking about dial tests on the disks he realised I probably just wanted this sorted!!

Thanks for all your help so far

Phib

Manx V8V

482 posts

113 months

Friday 16th February 2018
quotequote all
That is definitely the correct way to get it sorted, sadly over the years my experience has taught me that it is by far easier to get any issues sorted before handing over the money, rather than trying to get anything rectified once the money is in their bank, and I'm not just talking about cars.

phib

Original Poster:

4,520 posts

290 months

Friday 16th February 2018
quotequote all
I totally and utterly agree!

I am fighting every urge of just wanting the car now!

Phib

anonymous-user

85 months

Friday 16th February 2018
quotequote all
The car has been confirmed as standing for a while, the tech is talking about flat spots on the tyres, the problem is very likely material on the discs (as per a previous poster) giving the feel you describe when braking. The wheels themselves are irrelevant to this and I am surprised the dealer wants to faff about with wheels and tyres. The discs need a good clean and possibly a bit of refacing/grinding, new pads, and you should be good to go. smile If the problem persists, walk away wink. Good luck, I hope it works out for you. When I bought my car it was a few hundred miles away so the first time I drove it was when I got the keys and left the dealer, only to find after aboit half an hour that one of the front wheels was unbalanced due to a weight going astray, it was a slow drive back home frown.

cayman-black

13,268 posts

247 months

Friday 16th February 2018
quotequote all
rovcallum said:
Warped discs seems like the obvious cause.
I'd insist on their tech checking them.

If nothing can be found - walk away.
If it's something they can fix for you - get it bought.
New front disc,s and pads i think.

Shinjuku79

146 posts

138 months

Friday 16th February 2018
quotequote all
Sounds like pad material build up. A way to clear this can be the following but clearly you won't want to be doing it on a car you don't own. I'd suggest you ask for wheel change to check and when it doesn't fix it go for new front discs and pads.

6* 90 - 50 mph medium pressure brake runs with 300m intervals

1* 110 - 50 mph harder pressure brake run. 600 m interval then three of the shorter ones.

Repeat step two once more.

Don't lock up or activate abs. Don't come to rest. Drive for 15 mins after with no braking to let the braking system cool off.

Clearly you need a safe place to do this and know you do so at your own risk.

Edited by Shinjuku79 on Friday 16th February 21:15

ds666

3,185 posts

210 months

Friday 16th February 2018
quotequote all
What’s pad material build up ? I’ve experience rusty discs which clean up under normal use and warped discs which need changing but never heard of material build up .
The process you describe is normal for bedding in new pads ?