Vantage twin LED driving lights.
Vantage twin LED driving lights.
Author
Discussion

Uncle Stig

Original Poster:

117 posts

159 months

Friday 9th March 2018
quotequote all
OK guys, this has been nagging me for a while and I’m 50/50 split on getting a spare grill made up to accommodate two 5inch Hella LED lamps.
You can’t stick them in the middle like the racing GTE without a lot of modification behind the grill. They would however fit quite easily where I’ve positioned them in the photo.
What do people think?
On a side note, I’ve just installed Divinatech’s sequential back light update and they’re absolutely fabulous, even though I never get to see them in action. Plus the service was second to none.
Anyway, what do people think.

Ken Figenus

6,011 posts

148 months

Friday 9th March 2018
quotequote all
Doesn't improve the looks for me - especially as that is THE classic clean original Vantage too. But its your car - if you like it go for it! [And i had two huge big humongous Cibies on my Escort] wink

telum01

987 posts

146 months

Friday 9th March 2018
quotequote all
It might be easiest to get an AMR grille and cut out the center where you want the rally lights to sit, then make a mounting bracket for the lights. The AMR grill doesn't use the central mounting points of the standard grilles, so you can use those for mounting points for the light bracket. And if you wanted to revert to stock, the only non-reversible thing you'd be doing is cutting up the AMR grille.

macdeb

8,760 posts

286 months

Friday 9th March 2018
quotequote all
It's a definite NO from me (is this a wind up?). Cibies on an Escort is one thing but this is just wrong. nonohurl

Edited by macdeb on Saturday 10th March 17:58

Uncle Stig

Original Poster:

117 posts

159 months

Friday 9th March 2018
quotequote all

Uncle Stig

Original Poster:

117 posts

159 months

Friday 9th March 2018
quotequote all
And of course

TheRainMaker

7,889 posts

273 months

Friday 9th March 2018
quotequote all
I think it looks quite good getmecoat

David W.

1,952 posts

240 months

Friday 9th March 2018
quotequote all
Uncle Stig said:
Anyway, what do people think.
Looks fab, get it done

GenialZ

74 posts

178 months

Friday 9th March 2018
quotequote all
It might be a bit of a job if you plan on using the existing grille. Most Vantages have 6 or 8 aluminium horizontal bars clicked into 4 grey plastic uprights. As a totality it's a rigid structure. With some of the horizontals cut then it won't hang together. The AMR idea is good, maybe GT8 or V12. Or custom make a grille, if you're bold. I had a look at the under grille on our runabout Mini Cooper (2004) the other day and it looks like someone went down to Wickes (Picture below is lifted from the internet). Sprayed black however, no-one would be any wiser.



There are companies who can knock up custom grills and surrounds. Never thought to look before.

Mine was damaged by a crow early on, one of the horizontals came off and one was bent. One of the uprights broke off. It just about held together. I replaced it last year. This is from AstonMartinBits:


Uncle Stig

Original Poster:

117 posts

159 months

Friday 9th March 2018
quotequote all
It would have to be a proper custom grill, as you say it’ll fall apart if you start chopping it up. I’ve looked into it and it can be done. But I’m having my doubts the more I look at it. It works well on the GTE, I really like that. Not sure here though.

divetheworld

2,565 posts

166 months

Friday 9th March 2018
quotequote all
Could you mount some behind the grille? That way they are invisible until you hit the on switch?

Ones packaged like this might be just the ticket?
https://www.diodedynamics.com/2015-2017-subaru-wrx...

Uncle Stig

Original Poster:

117 posts

159 months

Saturday 10th March 2018
quotequote all
I think I’ve come to the conclusion it’s not the best idea, however having a pair of additional lights set back behind the grill could be the answer, so I may look into that. It’ll certainly be a simpler installation.

TR-Spider

339 posts

109 months

Saturday 10th March 2018
quotequote all
I think the lights in the grill would probably look ok,
but the manufacturing of the grill will be a large effort, as one would need to weld in the rings.
And of course the grill would need to look perfect...

If it is better lighting you are after I would rather look into upgrading the stock headlights, as these are quite poor from a light quality point of view.
My daily driver, a 2004 BMW with it's stock Bi-Xenon "outshines" my 07 Vantage easily.
So replacing the Vantage's low-beam xenon with a bi-xenon (or more modern bi-LED) would help a lot.
Also the Vantage's high-beam would benefit from a more modern LED replacement.

However...that would be a huge effort on manufacturing as well...

Thomas



Edited by TR-Spider on Sunday 11th March 12:28

prefurbia

22 posts

135 months

Saturday 10th March 2018
quotequote all
I was actually thinking similar for my V12S

8Tech

2,221 posts

229 months

Monday 12th March 2018
quotequote all
Here are some rectangle LED's mounted behind the grille, fitted to the front crossmember. You can see just how much brighter they are than the cars standard lights which are on full beam in this picture. These are Lazer ST4's, around 3500 lumens EACH, or double the output of an aftermarket HID (high intensity discharge) lamp.




Murph7355

42,082 posts

287 months

Monday 12th March 2018
quotequote all
The one bit of the V8V design that I thought looked a little clumsy from some angles was the lower quarter of the front valance - the dead space below the headlight but to each outer side of the grilles.

Something, either round or perhaps mirroring the shape of the grille, set into that space would address that I reckon, and soften that angle/make it more functional.