Do I need Pressure sensors?
Do I need Pressure sensors?
Author
Discussion

vpr

Original Poster:

3,935 posts

269 months

Monday 19th March 2018
quotequote all
I have new tyres going on a spare set of wheels and don't really want to pop the original tyres to remove the pressure sensors

Is it going to be a major irritation flagging up pressure issues or is the fault going to be hidden under the glove box only?

This is all assuming that new sensors are £1525 each

rovcallum

553 posts

174 months

Monday 19th March 2018
quotequote all
A set of TPMS sensors appears to be around £140.
I would have them fitted to the spare wheels/tyres.

https://www.ebay.co.uk/itm/TPMS-Sensors-4-OE-Repla...

or

http://www.redpants.lol/tpms-fault-defeat-installa...

Edited by rovcallum on Monday 19th March 22:36

Graze01

1,203 posts

123 months

Monday 19th March 2018
quotequote all
Or depending on your car you can disconnect the monitor. (Early vantages up to 07) or get the TPMs delete harness from Redpants (later cars) as per previous post

Graze

J12KJR

2,860 posts

274 months

Tuesday 20th March 2018
quotequote all
rovcallum said:
A set of TPMS sensors appears to be around £140.
I would have them fitted to the spare wheels/tyres.

https://www.ebay.co.uk/itm/TPMS-Sensors-4-OE-Repla...

or

http://www.redpants.lol/tpms-fault-defeat-installa...

Edited by rovcallum on Monday 19th March 22:36
I believe the OP would also need to get the sensors coded to the system at a dealers which probably wouldn't be cheap.

vpr

Original Poster:

3,935 posts

269 months

Tuesday 20th March 2018
quotequote all
Thanks chaps. Very helpful

vpr

Original Poster:

3,935 posts

269 months

Tuesday 20th March 2018
quotequote all
Ok so the loom is an American company and it’s “Sold Out” and the sensors are for V8?

The harness is the easy option, or would have been

Without sensors is this going to come up in my central dash display and prevent anything else from displaying here?

telum01

987 posts

146 months

Tuesday 20th March 2018
quotequote all
vpr said:
Ok so the loom is an American company and it’s “Sold Out” and the sensors are for V8?

The harness is the easy option, or would have been

Without sensors is this going to come up in my central dash display and prevent anything else from displaying here?
More are being made and should be in stock very soon. That guy usually keeps on top of inventory but he went through a massively messy relocation and is getting everything set back up. (Not to mention lug nuts, among other things...) Slacker rolleyes

If you can unplug the TPMS module and you do not get a warning light, you can leave it unplugged and you will never get a warning light.
If you use a TPMS Defeat, it'll prevent the signal from reaching the computer. You'll need the Defeat for cars after ~07 or so because a 4th wire was added to give the warning light if the module is unplugged. The Defeat tells the car the module is still plugged in, but prevents the fault signal from reaching the car from the module. The Defeats are being used on V8/V12 Vantages, DB9s, and DBSs. Not sure about others.

Either way, you're disabling the car's ability to inform you of low tire pressure, so you'll have to pay attention to your tires like we all had to do back in the old days. You also don't need sensors at all when doing either of the above options.


Edited by telum01 on Tuesday 20th March 17:30

vpr

Original Poster:

3,935 posts

269 months

Tuesday 20th March 2018
quotequote all
Ok thanks. I’ll see if I can order one and if they will ship.