DB9 Front Suspension Question
Discussion
I posted a while back about a grinding noise. Hasn’t happened since, until today. When turning sharp right, as it was the last time I heard it. The noise is a loud metal grinding noise which stops after the turn. I have been having a little look at the front suspension to see if there is anything weird going on but you guys really know your stuff so here’s some pics:
Offside:


Drivers side:


One thing I can see different is that the suspension wishbone (if that’s the correct term) on the offside has a mounting point unused on it (first pic), whereas the drivers side has nothing in the same place. Are they all like that? The offside piece looks newer? Anything look wrong?
Any advice on what to check or look for much appreciated.
Apologies for the photo orientation.
Offside:
Drivers side:
One thing I can see different is that the suspension wishbone (if that’s the correct term) on the offside has a mounting point unused on it (first pic), whereas the drivers side has nothing in the same place. Are they all like that? The offside piece looks newer? Anything look wrong?
Any advice on what to check or look for much appreciated.
Apologies for the photo orientation.
Edited by anonymous-user on Thursday 29th March 15:35
8Tech said:
Lets have a pic at the edge of the disc and the pads in the gap of the caliper.
I’ve probably misunderstood your request. Did you mean from the outside of the caliper looking towards the wheel hub where the pads are? I would struggle to get a pic as it’s very tight against the alloy.
I am wondering if something shifts slightly when I get this noise because both times it has happened I have been out on a spirited test drive in the same roads (although the noise has happened at different junctions). The one today is turning to my house so it’s a corner I navigate regularly without this noise apart from today.
Cold said:
It's quite possibly one of the brake backplates/shields being a touch too close to the disc - or perhaps a stone wedged between the two giving a similar symptom.
This bit:

Thanks. Very interesting you mention that part as it struck me as a candidate for where the noise is coming from. Is there any easy way to adjust them, or put in spacers with the wheels off?This bit:
8Tech said:
The pics are perfect. I wanted to see if the pads were low or unevenly worn.
Try easing the disc backplate away from the disc, you may have some debris trapped in there.
Great, thankyou. Mike at BR had the car for service at the start of the month and needed to bed the discs and pads in as they hadnt been done prior (worrying), so I am confident the pads and discs are good.Try easing the disc backplate away from the disc, you may have some debris trapped in there.
I will have a go on the backplate. It does sound like the sort of noise you would get from thin metal, like an exhaust in the old days dragging behind my rust bucket metro lol.
Thanks for the replies everyone. I really hope this is the end of my niggles with this car. I love the car but the ownership proposition has not been easy and it gets wearing when you have a business and family to manage as well. I feel like I have acquired a third child sometimes. Lol.
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff


