Vantage clutch slave cyclinder replacement
Vantage clutch slave cyclinder replacement
Author
Discussion

bogie

Original Poster:

17,108 posts

303 months

Wednesday 18th April 2018
quotequote all
Out today and on the way home, thankfully about 5 miles away the clutch pedal gets stiffer and lower, then lower and stiffer with each change, just managed to get down my road and outside the house before clutch finally stops working. Pedal stuck all the way down, cant select any gears.

So waiting for AA in the morning to take it away, it was a few weeks off a yearly service anyway.

Fluid level is fine, and prior to this no symptoms at all (new clutch 25k miles ago) so assuming its the slave or master cylinder

Who else has had the slave/master cylinder replaced on their Vantage and how much did it cost?

.

telum01

987 posts

146 months

Wednesday 18th April 2018
quotequote all
You have to pull the torque tube to get to the slave cylinder, so it's only a couple steps shy of a clutch change. Hopefully that's not the problem.

bogie

Original Poster:

17,108 posts

303 months

Wednesday 18th April 2018
quotequote all
thanks...just been reading up on possibilities and could be a few things....will keep fingers crossed and wait for news on Friday. Hopefully nothing major had a drive out planned on Saturday...

bogie

Original Poster:

17,108 posts

303 months

Monday 23rd April 2018
quotequote all
Turns out it needs another new clutch....which is strange. Ive never had a clutch just go like that, theres always been some slipping first, rather than pedal stuck to floor and gone within a few miles of driving.

The car had done 10k miles on a replacement clutch when I bought it, and now a further 14k miles in my ownership. So 24k miles is not so good.

Oh well, this time around it will just be me driving it, so hopefully I can get nearer to my 73k mile clutch record smile

HBradley

1,037 posts

212 months

Monday 23rd April 2018
quotequote all
bogie said:
Turns out it needs another new clutch....which is strange. Ive never had a clutch just go like that, theres always been some slipping first, rather than pedal stuck to floor and gone within a few miles of driving.

The car had done 10k miles on a replacement clutch when I bought it, and now a further 14k miles in my ownership. So 24k miles is not so good.

Oh well, this time around it will just be me driving it, so hopefully I can get nearer to my 73k mile clutch record smile
Twin-plate this time?

bogie

Original Poster:

17,108 posts

303 months

Monday 23rd April 2018
quotequote all
Nope....the twin plate is another £1000 and Im not planning on keeping this car more than another 18-24 months....so perhaps 12k miles

Ive just given myself a goal to get that V12 Vantage Roadster in the next couple of years smile

Edit - turns out it was the release bearing that went this time, was plenty of wear left on clutch otherwise, but buggered now and now worth hassle/labour to leave it so may as well fit all new parts whilst its in bits.



Edited by bogie on Tuesday 24th April 10:47