V8 Vantage on the Dyno
Discussion
Since buying my car last year I've been meaning to get it on the dyno to see how healthy it is. I spent some time Googling for results from other cars and there's really very info out there for unmodified cars. Lots of threads about modifying stuff, but even then there's not a lot of results posted, even from the Yanks who normally love this stuff !
So today I finally got myself down to Surrey Rolling Road. A couple of warm up runs and then the final one, where it recorded 382.7 hp. I was very pleased, and a little bit surprised tbh.
2007 V8 Vantage, unmodified, 27k miles.

So today I finally got myself down to Surrey Rolling Road. A couple of warm up runs and then the final one, where it recorded 382.7 hp. I was very pleased, and a little bit surprised tbh.
2007 V8 Vantage, unmodified, 27k miles.

sundayjumper said:
Since buying my car last year I've been meaning to get it on the dyno to see how healthy it is. I spent some time Googling for results from other cars and there's really very info out there for unmodified cars. Lots of threads about modifying stuff, but even then there's not a lot of results posted, even from the Yanks who normally love this stuff !
So today I finally got myself down to Surrey Rolling Road. A couple of warm up runs and then the final one, where it recorded 382.7 hp. I was very pleased, and a little bit surprised tbh.
2007 V8 Vantage, unmodified, 27k miles.

you are getting 382 HP at the rear wheels?So today I finally got myself down to Surrey Rolling Road. A couple of warm up runs and then the final one, where it recorded 382.7 hp. I was very pleased, and a little bit surprised tbh.
2007 V8 Vantage, unmodified, 27k miles.

Somethings is wrong. Aston claims 380 HP at the crank for the 4:3 engine. 380 at the wheels translate to over 430HP at the crank?
Am I missing something?
mjk1 said:
S_HP is at the flywheel for a Dyno Dynamics Dynamometer so directly comparable with the factory figure of 380 BHP. The power measured at the wheels is labeled HP and in this case, I’d guess about 320 BHP.
Yeah, I got that bit - its corrected to give the flywheel figure...and AFR (not torque) 
sundayjumper said:
bogie said:
...an extra 15bhp or so
Hmm, if true that would put my car tantalisingly close to 400 ! And I do have a pair of cat replacement pipes sitting in the garage but from what I've read the 4.3 needs a remap to avoid constant EML messages ?On the later 4.7 they have 2 sets of cats and its easy enough to change the secondary cats for more noise/power without lighting the MIL (thats what I have on my car, Aston dealers offer these cat pipes for £600 ish too)
You can also change airboxes which helps - thats where most of the gain comes from on the 400bhp Aston power kit on the N400
http://www.davidapplebyengineering.com/intake.html
So there are a few relatively inexpensive options out there for 15-20bhp gains before you do the manifolds.
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff





