Are AM brake rotors handed
Discussion
So I bought new rotors from AM dealer for my V8V
I fitted them on the weekend - simple
then tonight I suddenly had the thought should they be handed so the grooves run in a specific orientation to the direction of rotation
the ones I've got were all the same
that means on the drivers side the grooves run "backwards" and on the passenger side they run "forwards"
or is it only the direction of rotation of the vanes inside the rotor that is important?
Other rotors Ive seen (in fact the ones i've got on my TR4 & TR6) are handed so the grooves run the same orientation to the rotation
does this matter at all or is it just one of life's little mysteries
Graeme
I fitted them on the weekend - simple
then tonight I suddenly had the thought should they be handed so the grooves run in a specific orientation to the direction of rotation
the ones I've got were all the same
that means on the drivers side the grooves run "backwards" and on the passenger side they run "forwards"
or is it only the direction of rotation of the vanes inside the rotor that is important?
Other rotors Ive seen (in fact the ones i've got on my TR4 & TR6) are handed so the grooves run the same orientation to the rotation
does this matter at all or is it just one of life's little mysteries
Graeme
Edited by Graze01 on Tuesday 1st May 12:07
As above, the standard rotors are non directional. The slots on them will be facing on way on the LH side of the car and the other way on the RH side of the car. The important part are the internal veins. If the veins are directional (as they are in the diagram posted above), then those need to be put on a specific side. The veins in the standard rotors are not directional.
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff



