Panel dents db9
Discussion
I hope I am right that the door panels (and others) on the db9.2 are aluminium composite?
What are they like in getting small dents out of?
Some mum decided to park next to me at lunchtime at a fish and chips place on the A64 and her young son in the back opened his door onto the aston. I only knew about it because the car alarm went off. She was all apologetic and it looked fine on first inspection but having got home there is a tiny dent, no paint broken thankfully. The dent is just above the keylock.
Hoping its straighforward...... alu is quite soft.
What are they like in getting small dents out of?
Some mum decided to park next to me at lunchtime at a fish and chips place on the A64 and her young son in the back opened his door onto the aston. I only knew about it because the car alarm went off. She was all apologetic and it looked fine on first inspection but having got home there is a tiny dent, no paint broken thankfully. The dent is just above the keylock.
Hoping its straighforward...... alu is quite soft.
I have taken my DB9.2 to a local dent specialist (Excel Dents of Aylesbury) who are very nice and do a lot of work up at Gaydon. There was several other Astons in the shop when I drive up there last Tuesday. They are quite optimistic about getting rid of the two sharp dents made by my leaf blower accidently thumping down on the bonnet and bouncing down it.
Check out Paintless Dent Removal operations near you. Many are mobile. As I understand it, Aluminium is somewhat harder to work with than steel, as it doesn't have a "memory".
Check out Paintless Dent Removal operations near you. Many are mobile. As I understand it, Aluminium is somewhat harder to work with than steel, as it doesn't have a "memory".
Peter McKean said:
... two sharp dents made by my leaf blower accidently thumping down on the bonnet and bouncing down it.
Very sorry to hear this! I assume you were blowing dry your car after washing? I have just recently watched some detailers´ videos on YouTube on car-drying with leaf blower vs. Air Force Blaster etc.. There a some pros and cons to be said for each gadget and one of them was to be careful not to accidentally touch the panels with the metal tip of the leaf blower.Hope you get this sorted soon!!
Peter McKean said:
I have taken my DB9.2 to a local dent specialist (Excel Dents of Aylesbury) who are very nice and do a lot of work up at Gaydon. There was several other Astons in the shop when I drive up there last Tuesday. They are quite optimistic about getting rid of the two sharp dents made by my leaf blower accidently thumping down on the bonnet and bouncing down it.
Check out Paintless Dent Removal operations near you. Many are mobile. As I understand it, Aluminium is somewhat harder to work with than steel, as it doesn't have a "memory".
Thanks peter.Check out Paintless Dent Removal operations near you. Many are mobile. As I understand it, Aluminium is somewhat harder to work with than steel, as it doesn't have a "memory".
I have had a couple of recommendations from locals to me, incl northernmedia
.I know the vehicle reg of the culprit (the woman came into the restaurant to ask whos car she had pranged) but hoping its going to be a minor cost so no need to get insurers involved.
Dont know about the rest of you but when things like this happen the car feels ruined with such a tiny imperfection which I know is totally ridiculous as it will be fixed.
I know exactly what you mean. Someone opened their car door chipping my old Vantage on the door crease and it was basically impossible to deal with. Spotted it every time I took the car out. So I sold it.
I know. That's ridiculous, but there you go.
The DB9.2 bonnet is double skinned and difficult, but I am assured it is possible - they've had a good look. Bumps are near the edge. Cost is £120 + VAT, not including any machine polishing to get the light scratches out.
I know. That's ridiculous, but there you go.
The DB9.2 bonnet is double skinned and difficult, but I am assured it is possible - they've had a good look. Bumps are near the edge. Cost is £120 + VAT, not including any machine polishing to get the light scratches out.
soofsayer said:
Dont know about the rest of you but when things like this happen the car feels ruined with such a tiny imperfection which I know is totally ridiculous as it will be fixed.
Know exactly what you mean. I've got three places on mine that aren't perfect and they are always the first thing I look at. I'm sure others wouldn't even notice them but .....I have had excellent results using Martin Leach (trades under dentman.co.uk). One set were in the bonnet of a 911 (steel and single skin but with cross bracing) and the second were in the door of a different 911 (other people opened doors onto the center section of the door). With both I just could not see where they had been after he took them out.
He is used (or was when I frequented there) by Porsche East London on their used stock to remove door bashes etc.
I don’t know about his work with aluminium however - but he is worth an email to check it out as he will say categorically whether he can do it or not...
RJ5560 said:
I have had excellent results using Martin Leach (trades under dentman.co.uk). One set were in the bonnet of a 911 (steel and single skin but with cross bracing) and the second were in the door of a different 911 (other people opened doors onto the center section of the door). With both I just could not see where they had been after he took them out.
He is used (or was when I frequented there) by Porsche East London on their used stock to remove door bashes etc.
I don’t know about his work with aluminium however - but he is worth an email to check it out as he will say categorically whether he can do it or not...
Thanks for the recommendation. I have got a local chap recommended who is going to book me in this week. Fingers crossed.He is used (or was when I frequented there) by Porsche East London on their used stock to remove door bashes etc.
I don’t know about his work with aluminium however - but he is worth an email to check it out as he will say categorically whether he can do it or not...
Just an update on Excel Dents of Aylesbury, though perhaps not relevant for the original poster.
Rob from Excel worked on the dents on my DB9 bonnet today (Sunday!) and the end result is perfect - two small, sharp dents are completely gone. I’m very pleased.
There’s still some light scratching so it’ll be back in to Excel for a polish, small correction and Gtechniq Lite ceramic coating next week.
Does anyone know where to get proper touch up sticks for Ceramic Grey?
Rob from Excel worked on the dents on my DB9 bonnet today (Sunday!) and the end result is perfect - two small, sharp dents are completely gone. I’m very pleased.
There’s still some light scratching so it’ll be back in to Excel for a polish, small correction and Gtechniq Lite ceramic coating next week.
Does anyone know where to get proper touch up sticks for Ceramic Grey?
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff


