4.3 Vantage (2007) "info centre"
4.3 Vantage (2007) "info centre"
Author
Discussion

sparkylive

Original Poster:

56 posts

109 months

Wednesday 16th May 2018
quotequote all
Question from (relatively) new owner:
When i hold the end of the left stalk to reset the info centre (the average speed, mpg etc), it takes 5+ seconds. The display then gets stuck saying "info centre is reset" (see pic) until i turn the ignition off and on again at which point it is reset and all is fine.
Any ideas on why it gets stuck? Am i doing something wrong?
thanks all


stuthemong

2,535 posts

248 months

Wednesday 16th May 2018
quotequote all
Try hitting the 'read' button on the stereo / nav, that clears some messages like that

Stu

divetheworld

2,565 posts

166 months

Thursday 17th May 2018
quotequote all
You’re holding the button down too long.
Holding down for a long press, maybe a couple of seconds will reset the parameter you’re looking at. Holding down for ages does what you have.
You’re expecting the reset to occur as you hold the button. It does it when you release.
Stoopid thing made of stoopid stuff.
smile

sparkylive

Original Poster:

56 posts

109 months

Thursday 17th May 2018
quotequote all
User error! Thanks