My V12SR help with the drivers seat

[mick996r]

Can anybody assist. I just changed the Steering Wheel for an Alcantera one which meant disconnecting the battery. All went fine except I can no longer set the drivers seat, the memory function does not work, the button on the side of the dash for moving the seat forward for access to the rear does not function but the light is on. The seat will only go backwards with no forward movement, I do not want to send it all the way back as at present I can still drive the car, albeit a bit of a stretch. I found this on the "Frequent Questions".

"Occasionally the seats need resetting, which is disconcerting as you need to move all the way up all the way towards the dash, the back all the way towards the dash- everything up and forward. Dont panic thinking you will make it worse / un-drivable (seat too far forward), it does work".

Any suggestions?

[mick996r]

Thanks for that. I received some good advice elsewhere and just in case the same thing occurs for somebody else, push the button to whatever way the seat moves. When at the seats limit (forward or back or up and down) then hold the button at the limit for 2 or 3 seconds. Do not sit on the seat, do it from the outside. Mine is now all good, and I like the feel of the alcantara s-wheel.