Window drop and rise when opening and closing door.

[Dewi 2]

With the drivers door ajar, when the window is closed it should stop a little before full travel.
After the door has been closed, the window should then automatically close fully.

That feature has failed and the window goes to full height, without the stop a little before full travel.
I did notice that when the window is at full height, the door cannot be closed.

These electrical gremlins often right themselves after a few start-ups, but can I somehow do a reset?

You will probably tell me to look in the manual, but it is not handy at present.

Thank you.

[davek_964]

Fully open the window, and keep button pressed for over 5s when it's fully open.
Fully close the window and keep button pressed for over 5s when it's fully closed

[Dewi 2]

Thank you very much devek.

The window is now working correctly.

[AWV12]

Indeed a reset can help most of the time.

If not, then the micro switces in the door (handle) need to be replaced (a common problem), so for future reference noted here in this thread.