Which OBD2 Reader?
Author
Discussion

David Ramsbotham

Original Poster:

293 posts

93 months

Saturday 20th July 2019
quotequote all
Thinking about getting a OBD2 reader for my V8V. I have heard some of the cheaper ones don’t work on Astons Has anyone tried a Foxwell NT301?
Many thanks, David.

craig elam

130 posts

155 months

Saturday 20th July 2019
quotequote all
i got a foxwell NT520 pre loaded with AM software from diagnosticworld.com , £189, used it on my 2005 db9 , i dont know how they got the AM software but it works!,

V8 Roadster

45 posts

100 months

Saturday 20th July 2019
quotequote all
I also use the foxwell 520, does a lot but not like the AMDS .....
I also tried an Autel Tester, nothing worth for AM.

Take the Foxwell 520 for a small price, nothing else works better on a AM.

Regards
Torsten

Paul1984

69 posts

231 months

Saturday 20th July 2019
quotequote all
I use this one...always worked well with no issues, and cheap too!

Generic U480 OBD2 OBDII EOBD CAN-Bus Auto Scanner Engine Code Reader Diagnostic Tool, Orange and Black https://www.amazon.co.uk/dp/B013DSTPWY/ref=cm_sw_r...

David Ramsbotham

Original Poster:

293 posts

93 months

Saturday 20th July 2019
quotequote all
Paul, that’s an amazing bargain. Have you used it much? Any snags? I think I may well save myself a lot versus the Foxwell then!
Cheers, David.

Graze01

1,177 posts

121 months

Saturday 20th July 2019
quotequote all
David

I have one the same as the link Paul put up

Shows codes, allows them to be cleared, not sure what else it needs to do but
has been useful for me in sorting out a couple of things (emission service light for O2 sensors and for dying throttle body)

Graeme

Paul1984

69 posts

231 months

Saturday 20th July 2019
quotequote all
Hi David, I’ve only used it to check and clear error codes but it seems to work perfectly for this - for the low price it’s worth a go to see if it suits your needs, works on most vehicles so you can also use it to check any other cars you own :-)

David Ramsbotham said:
Paul, that’s an amazing bargain. Have you used it much? Any snags? I think I may well save myself a lot versus the Foxwell then!
Cheers, David.

V8 Roadster

45 posts

100 months

Sunday 21st July 2019
quotequote all
There is a big difference between a cheap OBD2 Reader and the Foxwell.
With the cheap OBD Reader you can only read out the standard engine faults, harmonized on all vehicles worldwide with the OBD2 standard.

With the Foxwell you can read out a lot of AM codes in other electronic devices like transmission, ABS, instrument, heating etc.

There are two ports in a Vantage, one is for engine, the other is for anything else.

Torsten

bullet7

339 posts

131 months

Sunday 21st July 2019
quotequote all
David, I have both. The generic one was next to useless in diagnosing the cause of the lights that came on on the dashboard. The Foxwell diagnosed it perfectly (ABS sensor). You're welcome to borrow mine if you need it, but if you are intending to buy, I would go for the Foxwell. Think I paid around £150 off eBay.
Jeff

David Ramsbotham

Original Poster:

293 posts

93 months

Sunday 21st July 2019
quotequote all
Thanks to everyone for your comments and recommendations. We be good to take you up on your offer Jeff, if the need ever arises ( fingers crossed ). Cheers, David.