DB9 PCV valves

[Neil.LK]

Has anybody had the PCV one way valves changed on their DB9?
If so what was the ball park cost? And who did the work?
Thanks in advance

[dkatwa]

Hi. I had them changed on my DB9V by Dove motors. It was part of a larger service including plugs and coil pack so I don't know the cost for the PCVs themselves.

[Craig elam1]

I did my own, the two ford pcv valves were about 40 quid ea which is a bit strong considering there ford parts, the big parts cost for me was the inlet manifold gaskets well over 100 quid each.
The 2 pcv valves are the visible part of the system, theres some "duck bill" valves built into the rubber pipe harness , these go hard and fail, I checked mine and they were ok but i do wish I'd changed the whole harness, have a look at aston1936.com,
, Steve's done an in depth video and parts list, this is also the perfect time to do coils and plugs

[Neil.LK]

Thanks for the info, if your not as technically competent, like myself, does anyone have a feel for the costs involved?

Edited by Neil.LK on Sunday 26th April 21:23