DB9 V8V ARB bushes
Author
Discussion

JonnyCJ

Original Poster:

1,309 posts

84 months

Friday 19th June 2020
quotequote all
I’ve been prodding Powerflex to produce poly ARB bushes for the V8V (also DB9 depending on model)

Here is their reply..

This is a model we will design for in the future, but we do not have a release date at the moment I'm afraid.

Thank you for the offer of sending us the original bushes. However we actually have access to this vehicle in preparation.

In the meantime, we do list a range of Universal bushes of which some may be suitable:

Universal bushes don’t fit, however at £90 for a pair of front rubber AM bushes compared to around £40 for superior poly, it’s worth peeps dropping Powerflex a line to express interest.

Hopefully that’ll spur them on.

sales@powerflex.co.uk




phumy

5,828 posts

267 months

Friday 19th June 2020
quotequote all
JonnyCJ said:
I’ve been prodding Powerflex to produce poly ARB bushes for the V8V (also DB9 depending on model)

Here is their reply..

This is a model we will design for in the future, but we do not have a release date at the moment I'm afraid.

Thank you for the offer of sending us the original bushes. However we actually have access to this vehicle in preparation.

In the meantime, we do list a range of Universal bushes of which some may be suitable:

Universal bushes don’t fit, however at £90 for a pair of front rubber AM bushes compared to around £40 for superior poly, it’s worth peeps dropping Powerflex a line to express interest.

Hopefully that’ll spur them on.

sales@powerflex.co.uk
Have you tried these: https://www.polybush.co.uk/

They dont list the DB9 but might be worth a shout.

JonnyCJ

Original Poster:

1,309 posts

84 months

Friday 19th June 2020
quotequote all
Not tried them, but the models they list are all old school.

If Powerflex don’t show any interest I’ll try polybush.

Thanks for the heads up.

However one voice shouting is annoying, many is a crowd that can’t be ignored....

BigMig

205 posts

141 months

Friday 19th June 2020
quotequote all
Hey Jonny, I think others have been down this route before with both Polybush and Powerflex but it never came to anything, I certainly came to a dead end enquiring about bushes for the suspension arms. I think they assume that most AM owners will just open up their wallet and pay for AML parts rather than aftermarket alternatives. Maybe the tide is turning though with more home DIYers like yourself.

JonnyCJ

Original Poster:

1,309 posts

84 months

Friday 19th June 2020
quotequote all
If they get a few enquiries they may reconsider. Power to the people !