V8 Vantage bluetooth switcher unit
Discussion
I had the same problem. It's the bluetooth switcher if when the speakers cut out, you stamp on the kick plate in the footwell and the speakers work again.
This wasn't actually my problem though. I found that the coupling between a box behind the right hand side carpet in the trunk/boot had come undone. Pushed it back ion, and voila!... speakers working again.
This wasn't actually my problem though. I found that the coupling between a box behind the right hand side carpet in the trunk/boot had come undone. Pushed it back ion, and voila!... speakers working again.
Hi
I did the foot stamping stuff originally and nothing changed did a quick investigation to see where the said switch was located from other posts, i ordered up another switch , upgraded one , went to fit this morning and the original is defo not there so im still puzzled.
Ill take a look at your suggestion thought what carpet exactly ? There is the entry point on the side where fuse box is or is it nearer the rear bulkhead
Thanks
I did the foot stamping stuff originally and nothing changed did a quick investigation to see where the said switch was located from other posts, i ordered up another switch , upgraded one , went to fit this morning and the original is defo not there so im still puzzled.
Ill take a look at your suggestion thought what carpet exactly ? There is the entry point on the side where fuse box is or is it nearer the rear bulkhead
Thanks
I had the problem with Bluetooth relay. It looks like you have removed the access panel from memory to access properly you are meant to remove the whole passenger foot panel. The relay should be about 100mm further down. I could not get mine out with out removing the additional panel but detached the cable and put the replacement on top of the original. Fixed the radio problem.
In your photo lift up the lose bit of sound proofing at the bottom of the hatch it will be hiding underneath.
Also see link below, I remember now this is why I left the old one in until I had more time.
https://www.redpants.lol/bluetooth-switcher-kit/
In your photo lift up the lose bit of sound proofing at the bottom of the hatch it will be hiding underneath.
Also see link below, I remember now this is why I left the old one in until I had more time.
https://www.redpants.lol/bluetooth-switcher-kit/
Edited by dig123 on Thursday 27th August 21:56
Hi
I looked at the redpants how to and ive got the panel off happy to leave the old unit in place they are saying to remove the rest of the footwell panel if you want to remove it all together but it is just not there ive had my hand right in over the bottom edge up round the sides its just cables.
Its somewhere as my my phone is connected and blutooth works so still puzzled
I looked at the redpants how to and ive got the panel off happy to leave the old unit in place they are saying to remove the rest of the footwell panel if you want to remove it all together but it is just not there ive had my hand right in over the bottom edge up round the sides its just cables.
Its somewhere as my my phone is connected and blutooth works so still puzzled
It should be in there somewhere. In ours it was a small green anodised can with a connector at one end.
See if you can grab a chat with James Hawkes Reed at Aston Installations (google it)
He helped diagnose this issue with our car when numerous official aston dealers failed to resolve it.
Not only will he guide you in on the part but probably offer an improved replacement
Good luck
See if you can grab a chat with James Hawkes Reed at Aston Installations (google it)
He helped diagnose this issue with our car when numerous official aston dealers failed to resolve it.
Not only will he guide you in on the part but probably offer an improved replacement
Good luck
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff



