DB9 Steering Movement
DB9 Steering Movement
Author
Discussion

Bebelala

Original Poster:

6 posts

69 months

Wednesday 16th December 2020
quotequote all
Hi there
My 2005 DB9 has developed an annoying habit ! It has very slight but discernible movement at the steering wheel that feels like movement in the column rather than the rack or wheels ! I believe these steering columns are shared across various jaguar models and I wondered whether anyone has experienced similar symptoms or are aware of possible solutions . I think I read somewhere that there is an element of adjustment / tightening available via a grub screw but that might be my colourful memory kicking in !!

DB9VolanteDriver

2,658 posts

205 months

Thursday 17th December 2020
quotequote all
There was an issue with rattling steering wheels/air bags in early cars IIRC. And there was some kind of adjustment, but not remembering exactly what.

V8V Pete

2,536 posts

155 months

Thursday 17th December 2020
quotequote all
I had this on my previous 2009MY Vantage. As you say, it felt like the steering wheel was slightly loose on the column but was in fact the airbag being slightly loose in the steering wheel causing a "clunk" on turning the wheel sometimes. Dealer fixed FOC (?warranty ?part of recent purchase) and I think involved a new spring or something securing the airbag in the wheel.

Bebelala

Original Poster:

6 posts

69 months

Thursday 17th December 2020
quotequote all
Thanks guys . Any chance of this being addressed by a competent mechanic or is this a specialist job ? I have a guy who looks after my other cars and is relatively insightful and skilled .

yvr

365 posts

175 months

Thursday 17th December 2020
quotequote all
Bebelala said:
Thanks guys . Any chance of this being addressed by a competent mechanic or is this a specialist job ? I have a guy who looks after my other cars and is relatively insightful and skilled .
See this: https://www.6speedonline.com/forums/aston-martin/3...

Bebelala

Original Poster:

6 posts

69 months

Friday 18th December 2020
quotequote all
Thanks again . Great heads up. I'll show my go to guy but I'm concerned it's more of a 'notch ' feeling rather than a loose rattle as such . More like there's a wee bit of play there before the column reaches the rack . There's nothing evident on the rack /bushes and it all looks fairly tight at the business end ! Any one know if there is an adjustment in the column itself ?

Bebelala

Original Poster:

6 posts

69 months

Sunday 29th August 2021
quotequote all
Hey all ..Reseurecting this thread as I've had a busy year and not resolved the issue yet . Definitely feels notchy rather than a loose rattle . Any ideas ?

AM4884

129 posts

78 months

Sunday 29th August 2021
quotequote all
Hard to diagnose from afar, but I am unimpressed with how the column in my DB9 attaches to the rack. If the bolt or rivet fail, it could be a bad day. I ended up safety wiring mine. I assume you've looked at that joint - it comes off when you drop the motor, which is why I was in there...

Bebelala

Original Poster:

6 posts

69 months

Monday 30th August 2021
quotequote all
H8 . Thanks for the reply . I haven't looked at that but I'm going to have to get my mechanic to do just that and start there . I need to get it sorted before hibernation kicks in !!

Bebelala

Original Poster:

6 posts

69 months

Monday 30th August 2021
quotequote all
H8 . Thanks for the reply . I haven't looked at that but I'm going to have to get my mechanic to do just that and start there . I need to get it sorted before hibernation kicks in !!