Recommendations for London (ish) based workshop for V12VS
Recommendations for London (ish) based workshop for V12VS
Author
Discussion

Henry8601

Original Poster:

21 posts

181 months

Tuesday 1st February 2022
quotequote all
I need to have the backbox replaced on my V12VS due to seized valves, and unfortunately it's a bumper off job. I already have the replacement part, I just need to find somewhere to get it fitted. AM works (where I normally go) are quoting £550 for just the labour. Does anyone have any recommendations for vaguely London based workshops that don't charge the full Aston hourly rate, but which would still do a good job?

Honestly I'd do it myself if it wasn't bumper off...

Many thanks in advance!

MMarkM

1,682 posts

200 months

Wednesday 2nd February 2022
quotequote all
Trinity Engineering but they are South of of London now

BiggaJ

1,262 posts

68 months

Wednesday 2nd February 2022
quotequote all
How far are you willing to travel? And I guess it depends which side of London you are on.

A few places not too far if you can travel, Vantage Engineering near Guildford and Pheonix Aston in Basingstoke ... Just a few stops down the M3 if you are on that side.

Edited by BiggaJ on Wednesday 2nd February 13:20

David Ramsbotham

293 posts

93 months

Wednesday 2nd February 2022
quotequote all
Josh Pearce near Chertsey is the man for you, can thoroughly recommend.

Henry8601

Original Poster:

21 posts

181 months

Wednesday 2nd February 2022
quotequote all
Awesome, thanks both - will get on the phone to them and see what they can do!

JonnyCJ

1,309 posts

83 months

Wednesday 2nd February 2022
quotequote all
Are you sure it’s a bumper off jobbie ? On the V8V you can drop the silencer without removing the bumper.

The exhaust tips are held on with a bolt on each tip, this allows the section to come off and the silencer to drop down, clearing the bumper.

I’m not talking about the chrome tips by the way, the bit that sits inside it.



The valves themselves can be cut out and new ones welded in. AstonMartinBits have them, although they’re also available elsewhere at lower cost.

Have a google and you’ll find them.

EVR

2,245 posts

89 months

Thursday 3rd February 2022
quotequote all
JonnyCJ said:
The valves themselves can be cut out and new ones welded in. AstonMartinBits have them, although they’re also available elsewhere at lower cost.

Have a google and you’ll find them.
I did that if you need pictures, info, etc. The official valves are also on sale at DAE.

Henry8601

Original Poster:

21 posts

181 months

Thursday 3rd February 2022
quotequote all
Thank you for the help with the valves - but I managed to source a very low miles OEM V12VS backbox for the same price as just the supply of the valves

TheRainMaker

7,882 posts

271 months

Thursday 3rd February 2022
quotequote all
I've used AHM which is just down the M3, took the car there to replace both Co2 sensors, the owner seems like a real enthusiast.

https://www.astonmartincare.co.uk/