Virage 2012 - Rear Light Unit Condensation
Discussion
remove from the car, 3 nuts each side. Separate the two parts of the light (need some very gentle heating in the oven,) dry out, drill out a hole in the bottom and cover with a gore-tex patch (this allows any future moisture that manages to get in to escape again without letting any moisture in), then reseal with a decent silicon like (I use black silkaflex)
Be careful tightening back up to the body, too tight or uneven tightening will pull the unit out of shape and cause leaks again.
Lots of videos and instructions available online
Be careful tightening back up to the body, too tight or uneven tightening will pull the unit out of shape and cause leaks again.
Lots of videos and instructions available online
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff


