Ceramic Brake Replacement costs

[CatalystV12V]

Hi,

Anyone know current cost of replacing CCB disc's and pads?

Thanks!

PS I have tried searching but nothing obvious comes up.

[AdamV12V]

Front
https://astonmartinbits.com/models/8-V12-VANTAGE-2...

Rear
https://astonmartinbits.com/models/8-V12-VANTAGE-2...

Dont forget to add VAT to those prices too

[DAVIDOXE]

Wasnt there a company re furbing them for a fraction of the cost?

[DAVIDOXE]

https://www.rebrake.de/en/

[DBA086]

I think it’s worth calling around specialists- there seems ti be some deals to be had on replacement kits. Bamford Rose just replaced my rear brakes (discs and both sets of pads) for much less than the prices listed above. My car is on 59k miles as well.

Moving to steel discs is another option too.

[CatalystV12V]

Thanks all, 20k.. Kinda what I recall from my previous ownership.. but as said above might be worth hunting around.

I recall having a full new set of disks and pad under warranty back in 2014 ...

[CatalystV12V]

Thanks all, 20k.. Kinda what I recall from my previous ownership.. but as said above might be worth hunting around.

I recall having a full new set of disks and pad under warranty back in 2014 ...

[Phil57DBS]

Our discs are CCM 15 years old conception !
Go to latest CCB as Porsche/ McLaren / Aston DBSS...
My new CCB discs from Carbobrake/Germany
Half price versus OEM !

https://www.carbobrake.com

Edited by Phil57DBS on Wednesday 11th October 16:15

Edited by Phil57DBS on Friday 1st December 10:34

[quench]

Phil57DBS said:

Our discs are CCM 15 years old conception !
Go to latest CCB as Porsche/ McLaren / Aston DBSS...
My new CCB discs from Carbobrake/Germany

Interesting website, thanks for the link!

Just curious about a few things, if you don't mind commenting:

- I note that Carbobrake sells rotors without cross-drilled holes, claiming technology has evolved to the point they are not needed, but your picture shows cross-drilling. Is there any specific reason you decided to keep the cross-drilling?

- Are you using OEM pads or Carbobrake pads?

- How would you say the brake feel and performance are with the Carbobrake setup? Any appreciable difference from OEM?

TIA

[Vet Guru]

I could not even see a price for the carbobrakes maybe you have to call?
Nice site no prices

[magycks]

DAVIDOXE said:

https://www.rebrake.de/en/

Any idea of costs from these guys? I haven't got to replace my carbon ceramic discs or pads yet, but at some point shall have to

What are the recommendations for where to source pads? I have DB9.2

[Phil57DBS]

quench said:

Phil57DBS said:

Our discs are CCM 15 years old conception !
Go to latest CCB as Porsche/ McLaren / Aston DBSS...
My new CCB discs from Carbobrake/Germany

Interesting website, thanks for the link!

Just curious about a few things, if you don't mind commenting:

- I note that Carbobrake sells rotors without cross-drilled holes, claiming technology has evolved to the point they are not needed, but your picture shows cross-drilling. Is there any specific reason you decided to keep the cross-drilling?

- Are you using OEM pads or Carbobrake pads?

- How would you say the brake feel and performance are with the Carbobrake setup? Any appreciable difference from OEM?

TIA

I paid 5500€ for the two front discs.
I choose drilled discs as OEM
I use Pagid Rsc1 4941 front pads
And Rsc1 4943 for rear.
No squeal and half price !
Carbobrake pads are Pagid Rsc1 or Rsc2 or 3.
Feeling and performance à little better...

Edited by Phil57DBS on Friday 1st December 10:47