Vantage change Tyre Pressure Display

[MogUk]

Hello,

New Vantage owner, does anybody know how to change the TPMS display from displaying kPa to PSI. Manual doesn’t seem to have anything ( or I’ve missed it )

[CSK1]

No idea but both of your right tyres front and rear need inflating.
Have you tried changing the settings via the nav screen under “vehicle” then “settings”?

[LesXRN]

In my Vanquish, it changes when I swap from KPH to MPH via the settings menu.

[MogUk]

CSK1 said:

Have you tried changing the settings via the nav screen under “vehicle” then “settings”?

Yep, all I have is MPH > KPH and Gallons > Litres.

I’ve just gone to inflate them and the recommended pressures on the door sill are listed in kPa, first car I’ve owned that uses this rather than PSI or BAR, anyway all tyres inflated to 250kPa / 2.5 BAR or 36PSI ( everyday is a school day )

Thanks for the replies.

[V8LM]

Apparently, on the Mercedes it is only settable by coding, or by the ME app.

[Ninja59]

Coding only, as a European car it is KPa only. US cars due to setup and coding are in PSI from memory.

If you remember 2.5 bar it makes it much easier. The range on Vantage is cold tyre pressures low minimum 32 PSI, highest 43 PSI