2012 MY V8 Vantage 10 Spoke Diamond Cut Alloys

[maybe someday]

I've had my wheels looked at and they cannot be cut, but can be sprayed a solid colour. My preference is to source the same wheels and on hunting through Ebay for starters, there seems to be only the odd single alloy. Does anyone on this forum know of a place worth checking as I know they will be limited in number, if many at all.
Thanks in advance,
Andy

[Rappa]

Hi Andy,

Search eBay for seller: dtv1967

His name is Dave Cooling - If anyone can get you Aston Wheels it’s him.

Sean

[V8VS]

I might be selling mine actually. I’m investigating alternatives (v12 lightweight, etc). I’d actually like a set with a lower offset as I feel they are far more tucked into the chassis. I did think a smaller spacer would suffice, but it appears I’d have to bolt a spacer to the hub, and then bolt the wheel to the spacer, which I’m not a fan of.

It’s been a long time since I was on PH, so much so that so can’t seem to update my original password using my email, hence I’ve created a new account. I’m wondering if that’s why I don’t appear to be able to add pictures at this stage.

Not really sure what they are worth, but I was also looking at Dave Coolings, so agree he has a good inventory and knows the technical aspects of all AM OE wheels it would seem.

[maybe someday]

Rappa said:

Hi Andy,

Search eBay for seller: dtv1967

His name is Dave Cooling - If anyone can get you Aston Wheels it’s him.

Sean

That's great, thanks very much indeed 👍

[maybe someday]

V8VS said:

I might be selling mine actually. I’m investigating alternatives (v12 lightweight, etc). I’d actually like a set with a lower offset as I feel they are far more tucked into the chassis. I did think a smaller spacer would suffice, but it appears I’d have to bolt a spacer to the hub, and then bolt the wheel to the spacer, which I’m not a fan of.

It’s been a long time since I was on PH, so much so that so can’t seem to update my original password using my email, hence I’ve created a new account. I’m wondering if that’s why I don’t appear to be able to add pictures at this stage.

Not really sure what they are worth, but I was also looking at Dave Coolings, so agree he has a good inventory and knows the technical aspects of all AM OE wheels it would seem.

Thanks for your feedback and let me know if you consider selling 👍

[LTP]

maybe someday said:

I've had my wheels looked at and they cannot be cut, but can be sprayed a solid colour.

Then they must either have been seriously damaged, or have been refinished a number of times, as I believe the wheels can be refinished/recut about 3 times before you start to lose the features

[maybe someday]

LTP said:

maybe someday said:

I've had my wheels looked at and they cannot be cut, but can be sprayed a solid colour.

Then they must either have been seriously damaged, or have been refinished a number of times, as I believe the wheels can be refinished/recut about 3 times before you start to lose the features

The guy who.looked pointed out that two of them had been cut more than the other two so who knows as you can only go on the history that comes with the car.