Leaking passenger side A pillar
Discussion
I had exactly this on the driver's side, except it ran unnoticed down into the footwell and the insulation under the carpet was absolutely soaked (hence why the interior misted up). The only place I could think it was coming in was round the windscreen, the seal between glass and rubber. Being a boat owner I have a bottle of 'Captain Tolley's Creeping Crack Cure' which it devoured voraciously - it took 3-4 treatments before it stopped running in. Problem seems to be fixed now.
https://www.amazon.co.uk/Captain-Tolleys-Creeping-...
https://www.amazon.co.uk/Captain-Tolleys-Creeping-...
If I were in your shoes I'd be inclined to remove the A-pillar trim to see if the source of the leak becomes more obvious.
A word of caution - I can't recall how old your car is (I know you've mentioned it in other posts) but I had a 2007 Volvo (part of PAG, along with AML and JLR at the time) and I started to get a screen leak, in my case from the top. Eventually I had to get a new screen fitted as the PU adhesive was progressively debonding off the body flange.
The correct functioning of the airbags relies on the screen being firmly bonded to the body. I mention this only as my wife's 2007 Volvo also has a bonding issue with one of the side glasses and I have heard of other cars from around that time with glass bonding problems. I have no idea if it was a process or a materials issue.
A word of caution - I can't recall how old your car is (I know you've mentioned it in other posts) but I had a 2007 Volvo (part of PAG, along with AML and JLR at the time) and I started to get a screen leak, in my case from the top. Eventually I had to get a new screen fitted as the PU adhesive was progressively debonding off the body flange.
The correct functioning of the airbags relies on the screen being firmly bonded to the body. I mention this only as my wife's 2007 Volvo also has a bonding issue with one of the side glasses and I have heard of other cars from around that time with glass bonding problems. I have no idea if it was a process or a materials issue.
mike-2txrc said:
Yeah only had it 3 weeks so just finding all the little niggles with it.
Doesn't have a sunroof on this one unfortunately.
Will have a look at the seal and hope it's not the windscreen seal.
Thanks again
It's a pity there is no way to message you Mike. I have some information that may help you.Doesn't have a sunroof on this one unfortunately.
Will have a look at the seal and hope it's not the windscreen seal.
Thanks again
Cant put it up here as I may get told off.
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff


